Responsive image
博碩士論文 etd-0316118-170838 詳細資訊
Title page for etd-0316118-170838
論文名稱
Title
應用限制理論改善製造執行系統導入-以T公司為例
Utilizing Theory of Constraints to Improve the Implementation of Manufacturing Executive System-A Case Study for T Company
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
93
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2018-03-27
繳交日期
Date of Submission
2018-04-26
關鍵字
Keywords
關鍵成功因素、導入方法、製造執行系統、限制理論
TOC, MES, CSF
統計
Statistics
本論文已被瀏覽 6153 次,被下載 2
The thesis/dissertation has been browsed 6153 times, has been downloaded 2 times.
中文摘要
製造執行系統(Manufacturing Exective System,MES)已發展多年,企業認為導入MES能夠提升生產作業效率,進而尋求委外資源進行導入,先前個案研究指出每間企業文化不同,在系統導入會面臨不同的問題,其中人是最大的問題。限制理論作者高德拉特提到工廠目標是賺錢,有效產出能使企業不斷獲利,是否能有效產出取決於瓶頸,若企業本身存在現有運作流程,在作業習慣沒有改變下導入系統,對工廠作業績效不會提升,反而使企業競爭力下降。在個案中導入系統後,高層主管感受不到導入後的效益,其原因是產生新的瓶頸,因此,本研究運用限制理論工具探討個案公司導入製造執行系統的過程,以維運現況找出系統限制,以現況圖找出主要原因,然而這些問題並非無法解決,而是因為有衝突問題及障礙,仍需考量隱藏的風險。本研究藉由過往個案資料針對本個案提供改善作法,導入方法沒有十全十美,只有適不適合。本研究參考相關文獻後,歸納個案公司研究結果如下,提供未來企業導入系統之參考:
(一) 人為錯誤只能夠降低,但無法避免,作業模式應該改變。
(二) 委外選擇有產業經驗的軟體廠商,能力成熟後可考量自行開發。
(三) 導入前企業建立內部對MES系統的認知,廠商應學習相關產業知識。
(四) 擬定短中長期對策,降低對舊系統的依賴行為。
Abstract
Manufacturing Exective Systems (MES) has been developed for many years. Enterprises think that can improve the efficiency of production operations by implementation MES and then seek outsourced resources for implementation. Previously, case studies pointed out that each enterprise culture is different and faces varied problems in system implementation among them, people problem is the biggest especially. Theory of constraint creator Goldratt mentioned the goal of factory is to make money, the effective output can make companies continue to profitability, whether the effective output depends on the bottleneck, if the existing operating processes before the implementation of new system has not changed, it will not improve the performance of factory operations, and make it less competitive. After introducing the system into the factory, the senior manager can not feel the benefits after the introduction. The reason is that there is a new bottleneck. Therefore, this study explores the process by which a case company implement into the manufacturing execution system by using the theory of constraint tool to find out the system restrictions, to find out the main reasons for the situation, but these problems are not unsolvable, but because of conflicts and obstacles, still need to consider the hidden risks. In this study, past case information is provided to improve the case. The method of implementation is not perfect, but suitable. The research reference to the relevant literature, the inductive case company research results are as follows, to provide a reference for the future enterprise implement system:
(A) Human error can only be reduced, but can not be avoided, mode of operation should be changed.
(B) Outsourcing choose industry-experienced software vendors, after the ability to consider its own development.
(C) Before the introduction of enterprises to establish internal MES system awareness, manufacturers should learn the relevant industry knowledge.
(D) To formulate short-term and long-term measures to reduce the dependence on the old system.
目次 Table of Contents
摘要 I
ABSTRACT II
誌謝 III
目次 IV
表目錄 VI
圖目錄 VII
第一章 緒論 1
1.1 研究背景 1
1.2 研究目的 2
第二章 文獻檢閱 3
2.1 MES製造執行系統 3
2.2 MES導入方法論 7
2.3 專案關鍵成功因素 13
2.4 限制理論 21
第三章 研究方法 31
3.1 研究方法 31
3.2 研究設計 32
3.2.1 個案背景說明 33
3.2.2 資料收集方法 33
3.2.3 問題分析方法 34
3.2.4 研究架構 35
第四章 MES導入個案分析 36
4.1 MES導入專案描述 36
4.1.1 公司產品介紹 36
4.1.2 製程基本介紹 38
4.1.3 專案時程 39
4.1.4 專案組織結構 40
4.1.5 導入MES系統前的準備工作 42
4.2 尋找問題原因 46
4.2.1 個案資料說明 46
4.2.2 專案過程 46
4.2.3 現況分析 50
4.2.4 不良原因分析 53
4.3 找出核心問題 56
4.3.1 訪談結果彙整 56
4.3.2 衝突問題探討 64
4.3.3 定義核心問題 66
4.4 創造解決方案 68
4.4.1 核心問題解決方案 69
4.4.2 目標障礙 74
4.4.3 建立未來圖 76
第五章 結論 77
5.1 結論 77
5.2 研究限制 78
5.3 對後續研究的建議 78
參考文獻 79
附錄A、昆山MES客製需求規格書意見回覆表 82
附錄B、需求清單匯總表 83
附錄C、MES功能需求表 84
參考文獻 References
一、中文部分
文茂平. (2001). 半導體業資訊委外決策模式-台灣晶圓代工廠之個案研究. (碩士), 國立交通大學
王文良. (2013). 軟體專案外包延宕之探討. (博士), 國立中山大學
王晃三, & 顏貽楨. (2002). 限制理論的問題管理模式. 中華民國品質學會第 38 屆年會暨第 8 屆全國品質管理研討會.
王傳業. (2006). 以交易成本理論探討自行開發與使用套裝軟體ERP系統的差異. (碩士), 世新大學
田財振. (2014). 套裝軟體導入之動態研究–以ERP為例. (碩士), 國立高雄應用科技大學
田野. (2017). CIO大視野: 人民郵電出版社.
余明信. (2013). 從套牢效應探討企業資訊系統委外之策略分析-以A公司為例. (碩士), 國立臺灣科技大學
吳仁和. (2012). 物件導向系統分析與設計: 智勝文化.
吳純鎰. (2006). 軟體專案延宕與中止之研究. (碩士), 國立中山大學
李榮貴, & 張盛鴻. (2005). TOC限制理論: 中國生產力中心.
李樹瑾. (2005). 軟體委外雙方認知與期望落差之探討. (碩士), 國立中山大學
林東清. (2013). 資訊管理e化企業的核心競爭能力: 智勝文化.
金純瑩. (2010). ERP系統與MES系統整合之研究—以某光電公司為例. (碩士), 中華大學
俞東紳. (2012). 銀行資訊系統委外廠商評選之研究:以 X 銀行為例. (碩士), 華梵大學
孫思源. (2001). 由社會交換理論探討資訊系統委外合夥關係之影響因素. (博士), 國立中山大學
許淑麗. (2009). 資訊系統委外之廠商評選準則與權重建立之研究-以世新大學為例. (碩士), 世新大學
郭明哲. (2012). 中小企業製造執行系統導入之個案研究. (碩士), 國立清華大學
曾惠悉. (2008). 企業與委外廠商資源對企業績效之影響─以ERP系統委外為例. (碩士), 國立中正大學
曾鈺翔. (2003). 企業導入製造執行系統方法論與績效評估. (碩士), 國立臺北科技大學
甯安泰. (2009). LED產業導入製造執行系統關鍵失敗因素之研究. (碩士), 國立彰化師範大學
黃凡紋. (2001). 影響MES績效之關鍵因素研究-以IC製造業為對象. (碩士), 國立交通大學
黃思恩. (2006). 應用AHP探討營造業導入ERP之關鍵成功因素. (碩士), 開南管理學院
黃茹鈺. (2009). MES系統運用於收集生產工時之改善-以手工具產業R公司為例. (碩士), 逢甲大學
楊志生. (2002). 企業導入ERP系統專案管理-限制理論之運用. (碩士), 中原大學
楊怡娟. (2003). 企業跨組織知識分享之研究─以資訊系統委外為例. (碩士), 國立中山大學
廖元模. (2005). 使用者主導權的概念、成因及影響的實徵研究. (碩士), 國立中央大學
綠能趨勢網. 太陽能背板. Retrieved from http://pv.energytrend.com.tw/knowledge/20130903-6714.html
劉怡甫. (2004). 應用限制理論分析企業線上學習機制之個案研究. (碩士), 輔仁大學
劉時捷. (2013). 探討企業自行開發ERP系統之員工使用意圖 –以南部某傳產公司為例. (碩士), 國立高雄應用科技大學
劉璁翰. (2002). 企業導入ERP系統階段性關鍵成功因素之研究. (碩士), 國立臺北科技大學
黎遠駿. (2006). 市場進入策略與營運策略之動態性研究-以資訊軟體產業為例. (碩士), 國立政治大學
盧彥旭. (2001). 資訊系統委外選商評選準則及權重之建立. (碩士), 世新大學
謝禎錕. (2016). 運用限制理論探討軟體開發組織進行敏捷轉型之研究—以某軟體服務公司為例. (碩士), 國立中央大學

二、英文部分
Akomode O. J., et al.(1998), “Constructing customised models and providing information to support IT outsourcing decisions”, Logistics Information Management.
Goldratt, Eliyahu M.(1997).”Critical Chain,”North-River Press.
Goodhue, D. L., & Thompson, R. L. (1995). “Task-technology fit and individual performance,” MIS quarterly, 19(2), 213-236.
Hammer, M.and Champy,J.(1993). ”Re-engineering the Corporation: Amanifesto for Business Revolution,” Nicholas Brealey Publicshing, London.
Homans,G.C.(1958).”Social Behavior as Exchange,”The American Journal of Sociology,pp.597-606.
Satzinger, J. W., Jackson, R. B., & Burd, S. D. (2006). Systems Analysis & Design in a Changing World, Fourth Edition: Course Technology Press.
Wood, J., & Silver, D. (1995). Joint application development (2. ed.). New York: John Wiley & Sons.
Yin,R.K.(1994).”CASE STUDY RESEARCH Design and Methods 2nded,”SAGE Publications.New York.
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:自定論文開放時間 user define
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus: 已公開 available


紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code