Responsive image
博碩士論文 etd-0107114-232759 詳細資訊
Title page for etd-0107114-232759
論文名稱
Title
探討以UP樹脂做為黏著材料應用於透水鋪面之可行性研究
A feasibility Study of Appling UP Resin As Adhesive Material on Permeable Pavement
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
94
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2014-01-11
繳交日期
Date of Submission
2014-02-08
關鍵字
Keywords
不飽和聚酯樹脂、透水鋪面、熱島效應、綠建築、溫室效應
unsaturated polyester resin permeable pavement, green construction, heat-island-effect, green-house-effect
統計
Statistics
本論文已被瀏覽 5727 次,被下載 1195
The thesis/dissertation has been browsed 5727 times, has been downloaded 1195 times.
中文摘要
中文摘要
目前都市所鋪設的地表鋪面多以瀝青或混凝土製的不透水與排水鋪面為主,除了無法保水,亦造成白天地表吸收的熱能無法有效在夜晚釋放完畢,使都市平均溫度高於鄰近郊區,此現象稱為熱島效應。
透水鋪面設計可有效保存土地良好滲透及涵養水源之功能,減少植被面因都市開發而消失的趨勢,有助於改善熱島效應,並符合綠建築九大指標中第三項:基地保水指標及生態城市之推動,不需另建龐大排水系統可以有效減少額外成本支出。
不飽和聚酯樹脂具有良好的耐候性且不具毒性的特性,可做為透水鋪面的黏著材料,較目前使用之飽和聚酯樹脂更適合做為建築黏著材料。本研究以室溫攪拌的方式混合不飽和聚酯樹脂與骨材製作透水鋪面,觀察其滲透率、耐候性與抗壓能力,實驗結果發現滲透係數K值平均大於1 •10-4 cm • s-1,經由耐候性測試,透水磚在經過一年後的日曬雨淋透水磚整體結構衰退幅度約5%,除了邊角處有些微剝落外,整體結構大致良好,唯抗壓實驗結果仍有待加強,日後若持續針對透水磚結構強度的部分做改善,是取代目前常見的黏著材料環氧樹脂與混凝土的絕佳替代材料。
研究過程製做透水磚的方式用於現場施工相當便利,可有效的減少施工時間與降低人力成本,日後若能將透水磚壓力強度的缺點改善並大量推廣,對於改善熱島效應、溫室效應與減緩都市瞬時豪雨所帶來的災患會有相當的貢獻。
Abstract
Abstract

Most of the pavements in the urban area are made by impervious materials, such as asphalt or concrete. Besides lack of water conservation, the impervious pavements are not capable to release the heat efficiently which absorbed during the day, causing the average temperature in the urban area is generally a few degrees higher than the rural area. This is generally called “Heat-Island-Effect”.

The permeable pavements allow better infiltration capacity and can help preserve water resources. These functions can reduce the heat island effect and help to improve the situation of green pavement area been reduced by the urban development Additionally, the increasing permeable area can function as unstructured measure to reduce the flood causing by the sudden storm rainfall in the urban area, instead of building expensive drainage systems to direct the storm flows.

Unsaturated polyester resins having good weather resistance properties and low toxicity, can be used as the adhesive material for making permeable pavement. In this study, the unsaturated polyester resin is used mixed with the granulate materials for the production of permeable pavement bricks. Two types of permeable bricks were made by gravel and hydroclays, which represent common pavement material and light material. The characteristics of permeability, weather test and pressure resistance are tested with the example bricks. The permeability (K) of the bricks are generally larger than the required standard (1 10-4 s-1) for permeable materials. Two types of the testing bricks were generally behaving well through the weather test which gone for a whole year and about 5% reduction of the shapes. The only short hand of the tests is the bricks pressure test was not up to the market requirements. However, this can be improved later and possible to use on the roof as the heat isolation material even with the existing pressure resistance.

The material proposed in this research has a good market potential to replace existing market material “Epoxy” due to its better workability which can reduce to working time and labor coast significantly. By further increasing the pressure resistance of the material, the method can be widely used in the urban constructions to help reducing the “heat-island-effect” and reduce sudden storm flood in the urban area.
目次 Table of Contents
目錄
誌謝 ....................................................................................................... i
中文摘要 .............................................................................................. ii
英文摘要 .............................................................................................. iii
目錄 .......................................................................................................iv
圖目錄 ....................................................................................................viii
表目錄 .................................................................................................x
第一章 緒論……………………………………………………………………1
1.1 前言………………………………………………………………………………1
1.2 研究目的…………………………………………………………………………3
1.3 研究架構…………………………………………………………………………3
1.4 研究內容…………………………………………………………………………3
第二章 文獻回顧……………………………………………………………………5
2.1 鋪面型式介紹……………………………………………………………………5
2.1.1 一般鋪面特性概述……………………………………………………………5
2.1.2 排水性鋪面特性概述…………………………………………………………5
2.1.3 透水性鋪面特性概述…………………………………………………………6
2.1.4 透水性鋪面與排水性鋪面比較………………………………………………8
2.1.5 透水性鋪面種類概述…………………………………………………………9
2.1.6 透水磚種類特性概述…………………………………………………………12
2-1-7 透水磚材料種類……………………………………………………………13
2.1.8 透水磚骨材選擇………………………………………………………………18
2.2 樹脂特性與發展敘述………………………………………………………….19
2.2.1 環氧樹脂特性…………………………………………………………………19
2.2.2 不飽和聚脂樹酯特性…………………………………………………………20
2.2.3 不飽和聚脂樹酯發展種類……………………………………………………21
2.2.4 FRP材料概述………………………………………………………………23
第三章 實驗方法及步驟……………………………………………………………25
3.1 實驗流程.. ……………………………………………………………………25
3.2 樣品製作………………………………………………………………………25
3.2.1 黏著材配製…………………………………………………………………25
3.2.2 透水磚樣品製作……………………………………………………………27
3.3 水文性能實驗…………………………………………………………………28
3.3.1 滲透率實驗…………………………………………………………………28
3.3.2 孔隙率實驗……………………………………………………………………29
3.3.3 吸水率實驗……………………………………………………………………30
3.4 物性強度測試…………………………………………………………31
3.4.1 抗壓強度測試…………………………………………………………………31
3.4.2 耐候性實驗……………………………………………………………………32
3.5 隔熱效果測試…………………………………………………………………33
第四章 實驗分析與果………………………………………………………………35
4.1 透水鋪面實際應用行為模式分析……………………………………………35
4.1.1 透水磚前製作業………………………………………………………………37
4.1.2 滲透性測試……………………………………………………………………40
4.1.3 透水磚總孔隙率實驗………………………………………………………45
4.1.4 透水磚吸水率實驗……………………………………………………………47
4.1.5 耐候性實驗……………………………………………………………………49
4.1.6 透水磚隔熱效果分析…………………………………………………………55
4.2 透水磚物性強度分析…………………………………………………………61
4.2.1 透水磚抗壓強度實驗…………………………………………………………62
4.2.2 透水磚實際抗壓測試…………………………………………………………66
4.3 整體成本評估…………………………………………………………………69
第五章 總結與展望………………………………………………………………72
5-1 磚體滲透性效能提高……………………………………………………………72
5-2 磚體抗壓強度改善相關方法……………………………………………………72
5-3 未來研究發展與建議……………………………………………………………76
參考文獻 ……………………………………………………………………………79
參考文獻 References
參考文獻
中文部分
1. 涂允捷,「營建廢棄物混凝土與磁磚應用於透水鋪面知性能實驗評估」,碩士論文,海洋大學,河海工程學系,基隆(2005)。
2. 黃柏仁,「排水性瀝青混和料鋪面試驗路段之成效評估」,碩士論文,中央大學,土木工程研究所,中壢(2001)。
3. 簡婉芸,「透水性鋪面對基地保水量敏感度之分析」,碩士論文,中央大學,土木工程研究所,中壢(2007)。
4. 吳宗騂,「透水性鋪面溫度行為模式之初步探討」,碩士論文,逢甲大學,交通工程與管理系,台中(2006)。
5. 吳正松,「透水性鋪面對工程環境影響之效益分析」,碩士論文,中央大學,土木工程研究所,中壢(2005)。
6. 「多孔隙排水性鋪面工程技術」,台灣區國道高速公路局,(1999)。
7. 「多孔隙排水面層之設計與施工技術考察報告」, 第17-24 頁交通部台灣區 國道高速公路局,(1998)。
8. 「可滲透式人行鋪面材料及施工方法研究」,內政部建築研究所,(2000)。
9. 「綠建築解說與評估手冊」,內政部建築研究所,(2003)。
10. 賴耿陽,「不飽和聚酯樹脂,FRP用樹脂合成及應用」,化學叢書,復漢書版社,(1999)。
11. 黃峙瑋,「以纖維強化不飽和聚酯樹脂/波特蘭水泥混凝土製造透水性人行道地磚可行之研究」,碩士論文,中國文化大學,材料科學與製造研究所,台北(2002)。
12. 許永綏,「高分子材料使用法」,科學圖書大庫,徐氏基金會,(1992)。
13. 林澄政,「腐蝕預力混凝土機樁,安全評估與補強之研究」,博士論文,中央大學,土木工程研究所,中壢(2001)。
14. 郭來松、朱禹樵、徐國洋,「不同級配料對滲透性係數影響之探討」,土木工程與物業管理研討會,清雲科技大學,土木工程系,中壢(2011)。
15. 黃俊仁,廖朝軒,「滲透側溝滲透能力之現地試驗」,經濟部水利署副工程司,台北(2006)。
16. 張家瑜,「RC 框型構架耐震修復補強之研究」,碩士論文,中央大學,土木工程研究所,中壢(2003)。
References
1. ACI Committee 548 (1986), “Guide for The Use of Polymers in Concrete”, Reported ACI Journal, 83, pp.798-829,.
2. Daid, H., Ben Dor and C. Heitener-Wirguin (1985), “The Porosity and Compressive Strengh of Polymer cement”, Vol. 15, No. 6, pp.1061-1067.
3. Fowler, David W, Kukacka Lawrence E. (1981), “Application of Polymer Concrete”, Publication SP-69, American Concrete Institute, Detroit.
4. Grosskurth, K. P. (1991), “Materials Research Society Symposium Proceeding”, 179, pp.273-281.
5. Krauss, Paul D. (1988), “Modern Plastics”,November, pp.92,.
6. Manson, John A .(1990), “Applications of Polymer Concrete”, Publication SP- 69, American Concrete Institute Detroit, pp.1.
7. Penn, Lynn S. and Chiao T. T., (1982), “Handbook of Composite”, Edited by George Lubin Van Nostrand Reinhold, pp.57-88.
8. Rosato, Dominick V., (1982), “Handbook of Composite”, Edited by George Lubin and Van Nostrand Reinhold.
9. Sandrolini, Franco (1990), “Polymer in Concrete”, pp.36,Proceeding of the 6th International Congress, Shanghai, China.
10. Toensmeier, Patrick A. (1988), “Modern Plastics”, November, pp.66.
11. Updegraff, Ivor H. (1982), “Handbook of Composite”, Edited by George Lubin and Van Nostrand Reinhold, pp.17-37.
12. Van Heystraeten, G and Moraux, C (1990), “TEN YEARS'EXPERIENCE OF POROUS ASPHALT IN BELGIUM”, Transportation Research Board.
13. Vipulanandan, C. and Mebarkia S. (1990), “Polymers in Concrete”, pp.411– 421, Proceeding of the 6th International Congress, Shanghai , China .
14. Wigman, P. T. (1990), “Kunststoffe German Plastics”, v.80, n.10, pp.64-65, 1169-1171.
15. Weeton, John W., Peters, Dean M. and Thomas, Karyn L. (1987), “Engineers’Guide to Composite Materials”, American Society for Metals.
16. Yang, Y. S. and Lee James L., “Polymer”, v.29, pp.1793-1800, 1988.
相關法規:
1. CNS中華民國國家標準,總號488,「粗礫比重及吸水性實驗」,中華民國97年7月21日公布。
2. CNS中華民國國家標準,總號1232,「混凝土圓柱體抗壓強度試驗法」,中華民國101年2月4日公布。
3. CNS中華民國國家標準,總號14995,「透水性混凝土地磚」,中華民國95年4月5日公布。
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:自定論文開放時間 user define
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus: 已公開 available


紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code