Responsive image
博碩士論文 etd-0507113-214431 詳細資訊
Title page for etd-0507113-214431
論文名稱
Title
電氣鍍鋅廠經營策略與產能績效之研究
A Study on Management Strategy and Productivity for C Electrogalvanizy Plant
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
123
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2013-06-02
繳交日期
Date of Submission
2013-07-22
關鍵字
Keywords
經營策略、產能績效、電氣鍍鋅、可靠度、設備使用率
Management strategy, Equipment availability rate, Productivity, Reliability, Electrogalvanizy
統計
Statistics
本論文已被瀏覽 5661 次,被下載 0
The thesis/dissertation has been browsed 5661 times, has been downloaded 0 times.
中文摘要
近幾年來傳統產業受到景氣影響極大,尤其是鋼鐵業更受中國大陸、日本、韓國等競爭者威脅與衝擊更大,再加上環保意識的抬頭,造成很多產業外移,甚至根也不留台灣,使得國內鋼鐵生產者的產能大受影響與打擊,其中以電氣鍍鋅產品最為嚴重,產量嚴重下降至原有產量的1/3,設備使用率也只能勉強維持在30~40%。由於開工率低,為了成本考量,本廠已多次被層峰要求必須思考未來的走向,研擬減班降低人事成本或改造為其他較有競爭力的生產線,甚至提出要關廠的計劃,為了電氣鍍鋅工廠的生機,無論如何都必須要提升個案公司產能,更要維持個案公司的持續經營。
本研究是以經營策略為出發點,利用可靠度模式來探討策略行銷、人資管理、供應鏈的學理,進而去研究提升產能績效的可行性。透過個案研究與專家訪談及問卷來驗證本模式之適用性。研究的主要目的除了1.瞭解現今可靠度管理系統。2.瞭解可靠度管理系統在生產作業管理過程所扮演的角色之外,還包括由工廠產能績效的提升來維持工廠的持續運轉,更進而保有持續競爭力。
研究結果發現六個類別之分析,以管理、人員、設備對產能績效影響最為重要。品質面、訂單面及安全面雖也是重要影響因素,但因可歸類到人員面與設備面,因此此研究努力程度就減低很多,著力也較小。歸納分析對本研究經營策略以可靠度之理論能否提升產能績效得到肯定的答案。依近年的各項績效值均達到所要求的目標值,在管理意涵上確已帶來正面效果,創造持續性競爭優勢。
Abstract
Traditional industry greatly affected by the boom in recent years, particularly iron and steel industry in mainland China, Japan, and Korea competitors such as threat and hit harder, coupled with the promotion of environmental awareness, resulting in relocation of many industries, even without leaving Taiwan so affected the domestic steel producers ' capacity and combat. Particularly to electrical galvanized products are the most serious, serious decline in output to one-third in the original production, Equipment availability rate was barely 30~40%. Due to the low operating rate, to cost considerations, the factory has several times been the top managers requirements must think about the future trend of develop; reducing personnel costs reduction or adapted to other more competitive production lines, or even made to shut the factory plan.
This study is based on management strategy through reliability model to extend strategies of marketing, human resource management, supply chain, and to study the feasibility of upgrading productivity. Through case studies and expert interviews and questionnaires to validate the applicability of this pattern. Main objective of the study includes 1. Understand reliability management system. 2. How important the reliability management system in production control process, besides still contains the plant productivity can increase and maintain the continued operation of the plant and thus remain competitive.
Research identifies six categories of analysis, management, personnel, equipment, and impact on the productivity of the most important. Quality, order and security were also important factors, but because they can be categorized into personnel and equipment, so this reduced the many research efforts, focused on smaller. Inductive analysis to the study of management strategy based on reliability theory can enhance productivity to be a positive answer. In recent years, the value of performance have reached the required target values, management does have a positive effect on the meaning.
目次 Table of Contents
論文審定書 i
致謝詞 ii
中文摘要 iv
Abstract v
目錄 vii
表目錄 ix
圖目錄 xi
第一章 緒論 1
第一節 研究背景與動機 1
第二節 研究目的 2
第三節 研究流程 3
第四節 研究範圍與限制 4
第二章 文獻探討 6
第一節 可靠度模式理論 6
第二節 可靠度管理與生產管理績效衡量 10
第三節 工廠產能管理績效評估 14
第三章 研究設計 17
第一節 研究方法 17
第二節 研究架構 17
第三節 訪談或問卷設計 18
第四節 抽樣計劃 18
第五節 資料分析方法 19
第四章 電氣鍍鋅產業分析 21
第一節 主要競爭者中國電氣鍍鋅鋼板產業概況 21
第二節 個案公司電氣鍍鋅鋼板產業分析 57
第五章 資料分析與討論 61
第一節 問卷資料分析與討論 61
第二節 採用可靠度模式提升電氣鍍鋅工廠產能作法與預期效果 73
第六章 結論與建議 80
第一節 結論 80
第二節 管理意涵 82
第三節 建議 82
參考文獻 84
一、中文部分 84
二、英文部分 85
三、網站部分 86
附錄 87
附錄1高階主管專家訪談或問卷 87
附錄2第二熱軋精軋主馬達可靠度實作成果 89
附錄3各成品產線產出率統計報表 107
參考文獻 References
一、中文部份
方至民,2000,企業競爭優勢,前程企業公司。
吳志雄,2002,全面生產管理(TPM)活動之導入與成效研究-以汽車零組件為例,國立中央大學管理學院高階主管企管碩士班論文。
吳思華,2000,策略九說,第3版,台北市:臉譜出版社股份有限公司出版。
吳金文,2012,鋼廠推動『以可靠性為中心的維修』之研究,中山大學高階經營碩士學程在職專班碩士論文。
李俊生,2003,國營企業民營化後之組織變革-以中鋼公司為例,義守大學管理研究所碩士論文。
易經順,2011,No2 HSM RCM 案例發表-精軋F3主馬達案例究,中國鋼鐵公司。
高福成,1994,TPM 全面生產保養推進實務,財團法人中衛發展中心專案改善系列。
張致誠,2002,實行TQM、JIT 及TPM 與企業績效間的關係,大同大學企業經營研究所碩士班論文。
張起明等,2011,可靠度工程與管理手冊,中華民國品質學會。
張湧全,2012,電鍍鋅(EG)產品兩岸市場概況(上),鋼鐵雙月刊(2012年四月版)
黃俊英,2010,行銷學的世界,天下文化書坊。
莊宸堯,2008,台灣地區大型集團企業多角化動機、策略、控制型態及績效間之相關性研究,中原大學企業管理學系碩士論文。
陳建豪,2001,台灣集團企業內部控制機制之研究,銘傳大學國際企業管理研究所碩士論文。
陳建宇,2003,台灣中小企業創業導向、組織資源與能力對企業績效影響之研究,國立成功大學高階管理碩士在職專班碩士論文。
彭鴻霖,2003,可靠度技術手冊可靠度管理技術。
湯明哲,1979,關係企業整合與控制之研究,國立政治大學企業管理研究所碩士論文。
楊錦洲,2009,品質與策略,中華民國品質學會。
鄒森木,2010,集團企業電控資源整合及管理機制之研究—以中鋼公司為例,中山大學高階經營碩士學程在職專班碩士論文。

二、英文部份
Aaker, D. 1989. Managing assets and skills: The key to a sustainable competitive advantage. California Management Review, 31(2): 91-105.
AGREE 1957. Foundation work on reliability theory, Reliability of military electronic equipment, Advisory Group on the Reliability of Electronic Equipment, U.S. Government Printing Office, Washington, DC.
Anderson, D .2002. The Maintenance Theory Jungle, The plant Maintenance Resource Center.
Anderson., Ronald, T.,& Neri, L. 1990. Reliability-Centered Maintenance Management and Engineering Methods, Elsevier Science Pub. Co.
Collis, D. J., & Montgomery, C. A. 1997. Corporate strategy: Resources and the scope of the firm. Chicago: Irwin.
Collis, D. J., & Montgomery, C. A. 1998. Creating corporate strategy. Harvard Business Review, May-June.
Hansson, J., Backlund, F.,& Lycke, L. 2003. Managing commitment: increasing the odds for successful implementation of TQM, TPM or RCM, The International Journal of Quality & Reliability Management. Bradford, 20( 8/9): 16-993.
Hisham, B. 2003. Plant Maintenance Strategy: Key For Enhancing Profitability. Maintenanceresources Monthly on-line magazine.
Hitt, M. A., Ireland, R. D., & Hoskisson, R. E. 2001. Strategic management: Competitiveness and globalization (4th ed.). South-Westren.
Kapur, K. C., & Lamberson, K. R.1977. Reliability in Engineering Design.
Klion, J.1992. Practical Electronic Reliability Engineerin, Getting the Job Done from Requirements through Acceptance, Van Nostrand Reinhold, N.Y.
Koontz, H. 1961. The management theory jungle. Journal of the Academy of Management, 4(3): 174-188
Mathew, S; Kennedy., & Damian. 2002. Minimising equipment down time under shock load conditions, The International Journal of Quality & Reliability Management. Bradford, 19(1):7- 90.
Prahalad, C. K., & Hamel, G. 1990. The core competence of the corporation. Harvard Business Review, 68(3): 79-91.
Sohei, H. 1997. How to measure maintenance performance, Tokyo Asian Productivity Organization.
Tony, D. 2002. Developing maintenance plans using RCM principles, CIM Bulletin. Montreal, 95(1065): 2-104.

三、網站部分
中鋼公司網站,2012.04.06, http://www.csc.com.tw/
Digitimes網站,http://www.digitimes.com.tw/
Displaysearch網站,http://www.displaysearch.com.tw/
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:自定論文開放時間 user define
開放時間 Available:
校內 Campus:永不公開 not available
校外 Off-campus:永不公開 not available

您的 IP(校外) 位址是 3.236.55.137
論文開放下載的時間是 校外不公開

Your IP address is 3.236.55.137
This thesis will be available to you on Indicate off-campus access is not available.

紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 永不公開 not available

QR Code