Responsive image
博碩士論文 etd-0606101-211833 詳細資訊
Title page for etd-0606101-211833
論文名稱
Title
螢光燈電子安定器之穩定設計
Robust Design of Electronic Ballasts for Fluorescent Lamps
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
57
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2001-05-28
繳交日期
Date of Submission
2001-06-06
關鍵字
Keywords
螢光燈、直交表、穩健設計、電子安定器
Electronic ballast, Fluorescent lamp, Orthogonal array, Robust design
統計
Statistics
本論文已被瀏覽 5693 次,被下載 29
The thesis/dissertation has been browsed 5693 times, has been downloaded 29 times.
中文摘要
本論文運用直交表的原理,發展出一應用連續直交表的穩健設計方法,來設計螢光燈電子安定器,使螢光燈的燈管輸出功率能在各種不同工作條件下,維持輸出功率的變動在10%以內。直交表設計的過程以電子安定器電路元件值及直流交鏈電壓為內側直交表之可控變數;燈管品牌、環境溫度、燈管使用時數及直流交鏈電壓的變動為外側直交表之雜訊變數。經由模擬的結果,可求出每個可控變數對功率的平均效應,作為搜尋較佳元件組合的指標,進行連續直交表設計步驟,在設定的元件範圍內,逐漸逼近預定的目標。此外,並運用外側直交表雜訊變數之平均效應,探討直流交鏈電壓對燈管功率之影響。本論文將此連續直交表設計法應用於40W螢光燈,設計出適用於不同燈管品牌、環境溫度及使用時數之螢光燈電子安定器。
Abstract
A robust design utilizing consecutive orthogonal arrays algorithm is proposed for designing electronic ballasts of fluorescent lamps. By this design method, the variation in the lamp power can be less than 10% under different operating conditions. In the manipulation of the consecutive orthogonal arrays, component values of the ballast circuit and DC-link voltage are used as controllable variables for inner orthogonal arrays; while manufacturers, ambient temperature, used hours, and variation in DC-link voltage are treated as uncontrollable variables for outer orthogonal arrays. The average effects of the output power for each controllable variable are calculated from simulation results, which are served as indexes to find the combination of circuit parameters with a better solution. With consecutive orthogonal arrays, the target values of the circuit parameters are approached step by step. In addition, the effect of the DC-link voltage on the lamp power can be understood from the uncontrollable variable of outer orthogonal arrays. The proposed design tool is implemented on the design of an electronic ballast for a 40W fluorescent lamp. The test results show that the designed electronic ballast can be adopted for the lamps from different manufacturers, with different used hours, and under variation in a wide range of ambient temperature.
目次 Table of Contents
第一章 簡介
第二章 電子安定器與燈管特性
第三章 連續直交表原理
第四章 電子安定器之穩健設計
第五章 直交表設計實例
第六章 結論與討論
參考文獻 References
[1] IEC Lighting Handbook, Reference and Application, Illuminating Engineering Society of North America, 1993.
[2] W. Elenbass, Fluorescent Lamps and Lighting, The MacMillan Company, New York, 1959.
[3] American Nation Standards for Fluorescent Lamp-Rapid-start Types-Dimensional and Electrical Characteristics, American National Standards Institute, Inc.
[4] E. E. Hammer, “Fluorescent Lamp Starting Voltage Relationships at 60Hz and High Frequency,” Journal of the Illuminating Engineering Society, pp. 36-46, Oct. 1983.
[5] M. K. Kazimierczuk and W. Szaraniev, “Characteristic of Various F40 Fluorescent Systems at 60Hz and High Frequency,” IEEE Transactions on Industry Applications, Vol. IA-21, No. 1, pp. 11-16, Jan./Feb. 1985.
[6] R. King and T. A. Stuart, “A Normalized Model for the Half-bridge Series Resonant Converter,” IEEE Transactions on Aerospace and Electronics Systems, Vol. AES-17, No. 2, pp. 190-198, March 1981.
[7] E. E. Hammer, “High Frequency Characteristic of Fluorescent Lamps up to 500kHz,” Journal of the Illuminating Engineering Society, pp. 52-61, Winter 1987.
[8] S. D. Johnson and R. W. Erickson, “Steady-state Analysis and Design of the Parallel Resonant Converter,” IEEE Transactions on Power Electronics, Vol. 3, No. 1, pp. 93-104, Jan. 1988.
[9] Y. G. Kang, A. K. Upadhyay, and D. L. Stephens, “Analysis and Design of a Half-bridge Parallel Resonant Converter Operating Above Resonance,” IEEE Transactions on Industry Applications, Vol. 27, No. 2, pp. 386-395, March 1991.
[10] M. Gulko and S. Ben-Yaakov, “Current-Sourcing Push-Pull Parallel-Resonance Inverter (CS-PPRL): Theory and application as a discharge lamp driver,” IEEE Transactions on Industrial Electronics, Vol. 41, No. 3, pp. 285-291, June 1994.
[11] M. C. Cosby and R. M. Nelms, “A Resonant Inverter for Electronic Ballast Applications,” IEEE Transactions on Industrial Electronics, Vol. 41, No. 4, pp. 418-425, Aug. 1994.
[12] Y. R. Yang and C. L. Chen, “A Self-excited Half-bridge Series-Resonant Ballast with Automatic Input Current Shaping, “IEEE Power Electronics Specialists Conference, pp. 881-886, 1996.
[13] 鷲尾泰俊,“實驗計畫法”,華泰書局,中華民國七十八年。
[14] M. S. Phadke, Quality Engineering Using Robust Design, Prentice-Hall INC. 1989.
[15] A. V. Feigenbaum, Total Quality Control, 3rd Edition, McGraw Hill Book Company, 1983.
[16] G. Taguchi, “Quality Engineering for the Development of Electronic Circuit Technology,” IEEE Transactions on Reliability, Vol. 44, No. 2, pp. 225-230, June 1995.
[17] S. C. Tam, Y. M. Noor, and L. J. Yang, “Maximizing the Output Power of a CO2 Laser Using the Taguchi Technique,” IEEE Journal of Quantum Electronics, Vol. 29, No. 1, pp. 192-197, Jan. 1993.
[18] D. E. Pachucki, “Environmental Stress Testing Experiment Using the Taguchi Method,” IEEE Transactions on Components. Packaging. and Manufacturing Technology - Part A, Vol. 18, No. 1, pp. 3-8, March 1995.
[19] A. R. Khoei, D. T. Gethin, and I. Masters, “Design Optimisation of Aluminum Recycling Process Using the Taguchi Approach,” Intelligent Processing and Manufacturing of Materials, Vol. 1, pp. 513-518, 1999.
[20] S. Lee and V. K. Madisetti, “Parameter Optimization of Robust Low-bit-rate Video Coders,” IEEE Transactions on Circuits and Systems for Video Technology, Vol. 9, No. 6, pp. 849-855, Sept. 1999.
[21] C. S. Moo, H. C. Yen, and C. R. Lee, “Implementation of Orthogonal Arrays on Design Passive LC Filters,” IEEE Power Electronic Specialists Conference, pp. 1662-1667, 1998.
[22] D. A. Koppikar, S. V. Kulkarni, P. N. Srinivas, S. A. Khaparde, and R. Jain, “Evaluation of Flitch Plate Losses in Power Transformers,” IEEE Transactions on Power Delivery, Vol. 14, No. 3, July 1999.
[23] N. Sun and B. Hesterman, “PSpice High Frequency Dynamic Fluorescent Lamp Model,” IEEE Applied Power Electronics Conference, pp. 641-647, 1996.
[24] T. J. Ribarich and J. J. Ribarich, “A New Control Method for Dimmable High-frequency Electronic Ballasts,” IEEE Industry Applications Society Annual Meeting, pp. 2038-2043, 1998.
[25] E. Deng and S. Cuk, “Negative Incremental Impedance and Stability of Fluorescent Lamps,” IEEE Applied Power Electronics Conference, pp. 1050-1056, 1997.
[26] C. S. Moo, H. C. Yen, Y. C. Hsieh and C. R. Lee, “A Fluorescent Lamp Model for High-frequency Electronic Ballasts,” IEEE Industry Applications Society Annual Meeting, pp. 3361-3366, 2000.
[27] C. S. Moo, H. L. Cheng, and Y. N. Chang, “Single-stage High-power-factor Electronic Ballast with Asymmetrical Pulse-width-modulation for Fluorescent Lamps,” IEE Proceedings- Electronic Power Applications, Vol. 148, Issue: 2, pp. 125-132, March 2001.
[28] J. Ribas, J. M. Alonso, E. L. Corominas, A. J. Calleja, and M. Rico-Secades, “Design Considerations for Optimum Ignition and Dimming of Fluorescent Lamps Using a Resonant Inverter Operating Open Loop,” IEEE Industry Applications Society Annual Meeting, pp. 2068-2075, 1998.
[29] 林子桐,“螢光燈溫度效應及電子安定器設計”,國立中山大學電機工程學系碩士論文,中華民國八十八年六月。
[30] 林志一,曾龍圖,“IsSpice Version 8 交談式電路模擬分析與應用”,全華科技,中華民國八十六年十二月。
[31] 鄭培璿,“IsSpice在電力電子與電源轉換器上的應用”,全華科技圖書,中華民國八十八年五月。
[32] 田口玄一,“品質工程-品質從產品與製程的設計開始”,中國生產力中心,中華民國八十年十月。

電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內一年後公開,校外永不公開 campus withheld
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus:永不公開 not available

您的 IP(校外) 位址是 18.207.240.205
論文開放下載的時間是 校外不公開

Your IP address is 18.207.240.205
This thesis will be available to you on Indicate off-campus access is not available.

紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code