Responsive image
博碩士論文 etd-0612117-132120 詳細資訊
Title page for etd-0612117-132120
論文名稱
Title
平版印刷業的經營管理之研究 -以飛鴻公司為例
A Study on Operation and Management of Lithographic Printing Industry -A Case of Graphichome
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
62
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2017-05-17
繳交日期
Date of Submission
2017-07-17
關鍵字
Keywords
專案管理、供應鏈管理、資訊化系統、競爭策略、鑽石模型
Information System, Supply Chain Management, Project Management, Competitive Strategy, Diamond Model
統計
Statistics
本論文已被瀏覽 5760 次,被下載 29
The thesis/dissertation has been browsed 5760 times, has been downloaded 29 times.
中文摘要
1992年臺灣印刷產業因數位科技的發展後,許多消費業者對於書籍及平面報章雜誌的使用需求量也大幅的降低,這對當時平板印刷造成相當的影響,而印刷產業在數位化科技的時代裡,也因此面臨到一些經營方面的問題,部分的業者也在轉型中出現經營方面的困境,使得一些業者前往對岸投資建設廠商,希望能在市場上的發展有較大的機會,但因為兩岸的政府法規及經營管理上有所差異,導致部分業者還在磨合時期就不了了之。現今經過二十幾年數位化科技後的印刷業也發展出許多相對應的經營模式,數位合板印刷、精緻高品質等特殊方式印刷。
綜觀下,臺灣傳統印刷產業仍具有相當規模的競爭力及生產力,這是一個基本內需的供應市場,臺灣的平面印刷需要強化高階管理的能力,高階管理人才進入產業管理,善用知識的管理及數位化科技的方式改善經營模式,並在製作的過程上加強改進,推動工業4.0自動化來降低人力成本以及建置資訊化的系統,才是現在市場上競爭所需要面對的主要目標,也才有更多的機會能往國際發展。因此根據本研究的個案對象「飛鴻文化股份有限公司」為例子,作為實驗論證的研究範例。本研究採取質性式的研究方法;分別訪問業界的五位高階經理人,並根據高階的知識管理言論來描述並依據證詞作為研究發展的主要基礎,其中以鑽石模型來比對台灣與對岸大陸的競爭力,以此方式相信對之後的印刷產業相關知識管理建構及發展能有所功勞。
最後統整出三大層面:技術層面的提升、市場層面的拓展、人才層面的培訓,如果多重視這三項主要的方向,配合現今的資訊科技,在相關的網路訊息上便可以輕鬆查詢出跟印刷產業有相關聯的方法,來提高競爭力並增加業務的通路,知識科技管理是企業中所不可或缺的重要環節,30年的企業如果可以把這幾年來所累積的經驗整合起來並製作成資料庫系統,那將會節省許多時間及增加做事效率。
Abstract
Taiwan's printing industry in the 1992 s after the rise of digital networks, consumers to book and print newspapers and magazines to read the relative reduction in demand, so the printing industry at that time caused a great impact on the printing industry in the digital era of the environment, Have faced the business crisis, most operators are facing the transformation of business thinking, some to the mainland to set up factories to obtain a larger market development, but the two management and government laws and regulations of the differences, some are still in the run-in stage to close End. Now after more than 20 years of digital printing development, the Taiwan printing industry has produced a lot of corresponding business model, a few plywood printing, fine high-level special printing
Taiwan's traditional printing industry still has a certain degree of competition and productivity, which is a basic domestic supply market, Taiwan's printing industry to strengthen the high-level management capabilities, high-level management personnel into the industrial management, make good use of knowledge management and digital to improve business Physical, and in the process to be improved to promote industrial automation 4.0 to reduce human costs and the construction of information systems, is now the market competition needs, but also have the opportunity to international development in the real estate industry. Therefore, according to the study object "Feihong Culture Co., Ltd." as an example, as an experimental demonstration model. This study takes qualitative research, interviewed five high-level managers in the industry, faithfully stated the events in practice, and based on the argument of high-level knowledge management as the basis of research and development, and compares the competitiveness of Taiwan and mainland with diamond model. On the follow-up of the printing industry-related knowledge management construction and development contribute.
The final conclusion of the three major aspects: technical upgrading, market development, personnel training, attention to these three most important direction, with the current technological development, in the network-related information to find out the link can be associated with the printing method , To improve the competitiveness of the business to increase access, knowledge management is an indispensable part of the enterprise, 30 years of business if you can accumulate 30 years of experience into a database, then his future is limitless.
目次 Table of Contents
審定書 i
摘要 ii
Abstract iii
目錄 v
表次 vii
圖次 viii
第一章緒論 1
第一節 研究背景與動機 1
第二節 研究目的 5
第三節 第三節研究流程 6
第四節 研究範圍與限制 8
第二章 產業現況趨勢 10
第一節 傳統平版印刷產業現況 10
第二節 數位印刷產業現況 14
第三節 合版印刷產業現況 18
第三章 文獻探討 21
第一節 知識管理 21
第二節 競爭策略 24
第四章 研究設計 30
第一節 研究結構 30
第二節 研究模式 31
第三節 研究方法 32
第五章 實證分析 35
第一節 台灣平版印刷業的競爭優勢比較分析 35
第二節 中國大陸平版印刷業的競爭優勢比較分析 38
第三節 飛鴻個案分析 41
第六章 結論與建議 45
第一節 結論 45
第二節 建議 49
第三節 管理意涵 50
參考文獻 52
參考文獻 References
方至民,2006,建構全球營運優勢,新北市:前程文化。
李武釗,2004,行銷知識管理、行銷知識能耐、行銷知識管理績效與市場績效的關係-以印刷包裝業為例,國立成功大學工學院工程管理專班碩士論文。
林行建,2000,印刷設計概論,新北:視傳文化。
馬曉雲,2000,知識管理實務應用,台北:華彩。
張中一,2002,臺灣平版印刷產業經營模式及競爭優勢之研究,國立政治大學 EMBA 研究所科技管理組碩士論文。
張庭彰,2005,「企業資源特質與策略觀點的知識管理活動模式之研究」,行政院國科會工業工程與管理學門94年度專題計畫成果發表會,行政院國家科學委員會。
張錫本,2006,數位印刷趨勢及數位彩色管理應用,台北:中華印刷科技學會會訊。
陳孟涵、陳昌郎,2013,台灣印刷業知識管理能力與組織績效之研究,台北:中華印刷科技年報。
黃麗娟,2002,臺灣圖文傳播科技發展歷程之研究,國立臺灣師範大學:碩士論文。

二、英文
Drucker, P.F. 1993. Post-capitalist society. New York: Harper Business.
Porter, M.E.1990.The Competitive Advantage of Nations. Harvard Business Review, 76(6): 77–90.

三、網路
中國大陸新聞出版廣電總局,101年度,中國大陸經營成本上升及其對我國產業發展之影響,http://www.gapp.gov.cn。
全球招商論壇(2015),「印刷產業」,http://2015tba.cier.edu.tw/download/20.2015_印刷產業說帖(中)。
經濟部工業生產統計,2015,「臺灣印刷業產銷存值」,http://www.moea.gov.tw/MNS/dos/home/Home.aspx。
鄭淇文,2016,「印刷產業寒冬連三年衰退」,https://www.credit.com.tw/creditonline/Epaper/IndustrialSubjectContent.aspx?sn=158&unit=362。
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:自定論文開放時間 user define
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus: 已公開 available


紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code