相位移條紋投影輪廓儀(Phase-shifting projected fringe
profilometry,PSPFP)是目前量測物體三維形貌較簡便卻亦不失精確工具之一。本論文針對相位移條紋投影輪廓儀之運作過程做一系列之誤差分析，並提出一套相當方便之誤差檢驗模式，此檢驗模式可輕易判斷PSPFP 的量測精確值，而且適用於其他類型之條紋投影量測技術，對現今形貌量測技術之誤差分析有極大之助益。

Phase-shifting projected fringe profilometry (PSPFP) is powerful for 3D profile measurements. Test and analysis for accuracy of PSPFP is presented. A novel scheme to identify the accuracy of evaluated phases is propsed as well. This test scheme can be applied to any kind of measurements which use fringe projection techniques.

致謝...............................................1
摘要...............................................2
目次...............................................4
圖目次.............................................7
表目次............................................10

一、前言
1.1簡介........................................11
1.2研究動機....................................12

二、相位移條紋投影法基本理論
2.1 相位移技術..................................15
2.2 三角量測法技術..............................18
2.3 相位展開與演算法............................20
2.4 縱深與相位立體座標關係......................21
2.5 結語........................................24

三、誤差探討與實驗原理
3.1 投影條紋週期之誤差探討......................26
3.2 對比度誤差探討..............................29
3.3 實驗儀器裝置................................31
3.4 實驗原理....................................35
3.5 結語........................................40

四、實驗工作與結果討論
4.1前置工作....................................41
4.2實驗流程....................................46
4.3實驗結果....................................53
4.4特性分析....................................54
4.5結語........................................63

五、結論與未來展望
5.1 結論........................................64
5.2 未來展望....................................65

六、參考資料..................................... 66

[1]自動光學檢測(AOI)市場及技術發展調查，經濟部，(1992) page2-4
[2] H. Takasaki, Appl. Opt. 9 (1970) 1467.
[3] V. Srinivasan, H.C. Liu, M. Halioua, Appl. Opt. 24 (2) (1985) 185.
[4] T. Matsumoto, Y. Kitagawa, T. Minemoto, Opt. Eng. 35 (1996) 1754.
[5] G. Lu, S. Wu, N. Palmer, H. Liu, Proc. SPIE 3520 (1998) 52.
[6] G. Wiora, Proc. SPIE 4117 (2000) 289.
[7] C. Zhang, P.S. Huang, F.P. Chiang, Proc. SPIE 4189 (2000) 122.
[8] Z.W. Zhong, C.P. Han, A.K. Asundi, Proc. SPIE 4398 (2001) 182.
[9] F. Chen, G.M. Brown, M. Song, Opt. Eng. 39 (2000) 10.
[10] O.D. Faugeras, G. Toscani, in: Proc. Int. Conf. Comput. Vision. Patt. Recogn.
(Miami Beach, FL), Aug. 1983, p. 996.
[11] A. Isaguirre, P. Pu, J. Summers, in: Proc. IEEE Int. Conf. Robotics Automat. (St.
Louis), 1985, p. 74.
[12] J. Weng, P. Cohen, M. Herniou, IEEE Trans. PAMI 14 (1992) 965.
[13] K.D. Gremban, C.E. Thorpe, T. Kande, in: IEEE Robotics Automat
[14] C.S. Vikram, Optik (Jena) 111 (12) (2000) 563.
[15] K. Creath, in: E. Wolf (Ed.), Progress in Optics, vol. 26, North-Holland,
Amsterdam, 1988, p. 350.
[16]H.Liu, W.H,Su, F.Wu ARL (2001) p112-116
[17] W. Faig, Photogramm. Eng. Remote Sensing 41 (12) (1975) 1479.
[18] H.A. Martins, J.R. Birk, R.B. Kelley, Comput. Graphics Image Process.
17 (1981) 173.
[19] P. Hariharan, B. F. Oreb, and T. Eiju, Appl. Opt. 26 (1987)2504–2505
[20] S. Tang, M. Kujawinska, R. J. Pryputniewicz, and M. Takeda, eds., Proc. SPIE
2860, (1996)91–98
[21] S.-W. Kim, M.-G. Kang, and G.-S. Opt. Eng. 16, (1997)3101–3105
[22] Peisen S. H, Q J. Hu, and F P Chiang Appl. Opt 41(2002), 4503-4509
[23] T. Maack and R. Kowarschik, Appl. Opt. (1996) 35, 3514–3524
[24] P. L. Wizinowich, Appl. Opt. (1990) 29, 3271–3279.
[25] B. Trolard, M. Kujawinska, R. J. Pryputniewicz, and M. Takeda, eds.,Proc. SPIE 2860(1996), 126–134.