Responsive image
博碩士論文 etd-0712102-151824 詳細資訊
Title page for etd-0712102-151824
論文名稱
Title
構裝體界面接著性能之實驗研究
The experimental investigation of structure on interfacial-adhesive effectiveness
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
80
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2002-07-06
繳交日期
Date of Submission
2002-07-12
關鍵字
Keywords
電子封裝、界面、疊紋干涉術
IC package, interface, moiré interferometry
統計
Statistics
本論文已被瀏覽 5667 次,被下載 0
The thesis/dissertation has been browsed 5667 times, has been downloaded 0 times.
中文摘要
本文研究方法為利用moiré干涉術來量測半導體構裝材料之界面特性,因為moiré干涉術適用於精密位移場量測,有其精確性及非接觸性檢測的優點,並可利用條紋作定性且定量的分析,所以非常適合處理具微小變形量構裝材料的量測分析。
主要目的係利用moiré干涉術對FR-4、綠漆、黑膠之界面接著位移場量測,利用moiré干涉術的U、V兩場分離出剝離應變、剪應變與拉應變,探討全域的施力狀態下應變之比例分佈,並發現轉折點等現象。
Abstract
The main aim of this paper is using the moiré interferometry to measure interface of the IC package structure materials. The moiré interferometry with high sensitivity can use the fringes to measure displacement field in small structure materials.
The objective of this study is to obtain displacement fields the interfacial adhesion of the substrate and epoxy by using the moiré interferometry. The peeling strain, shearing strain and tensile strain at the interface adhesion are distinguished by utilizing the experiment of data of u-displacement fields and v-displacement field. Finally, a turning point of failure, in found.


目次 Table of Contents
第一章 緒論…………………………………………………………1
1-1前言 ………………………………………………………1
1-2文獻回顧 …………………………………………………2
1-3本文架構 …………………………………………………5
第二章疊紋干涉術原理及數學模式建立…………………………6
2-1疊紋簡介……………………………………………………6
2-2疊紋干涉術原理……………………………………………7
2-3疊紋干涉術之數學模式……………………………………8
2-4疊紋圖像之產生與疊紋序號之判讀方法 ………………10
2-5疊紋干涉儀之架設 ………………………………………11
第三章實驗規劃與相關設備 ……………………………………18
3-1實驗規劃與步驟 …………………………………………18
3-2實驗儀器設備及用途說明 ………………………………18
3-3光學實驗設備的架設 ……………………………………23
3-4模具設計與試片製作 ……………………………………24
3-5光柵黏貼之作方法 ………………………………………25
3-6實驗注意事項 ……………………………………………26
第四章實驗過程與數據分析 ……………………………………38
4-1萬能拉伸測試機測試 ……………………………………38
4-1-1測試目的 ……………………………………………38
4-1-2萬能拉伸測試過程 …………………………………38
4-1-3萬能拉伸測試結果與討論 …………………………39
4-2封裝材料量測 ……………………………………………40
4-2-1目的 …………………………………………………40
4-2-2封裝材料量測過程 …………………………………40
4-2-3封裝材料量測結果與討論 …………………………42
第五章結果與未來展望 …………………………………………73
5-1結論 ………………………………………………………73
5-2未來展望 …………………………………………………73
參考文獻 …………………………………………………………75
參考文獻 References
1.A.J. Kinloch’ Adhesion and Adhesives’ Chapman And Hall 1990.
2.D.Y. Shih, J. Kim, P. Buchwalter, P. Lauro, H. Clearfield,
K-W. Lee, J. Paraszczak, S. Purushothaman, A. Viehbeck’ Adhesion Test Standardization for Multichip Module Packages ’IEEE Electronic Components and Technology Conference,pp.884-888,1995.
3.Masazumi Amagai’ The Effect Of Polyimide Surface Chemistry
And Morphology On Critical Stress Intensity Factor’ Microelectronics Reliability,pp.2077-2086,2000.
Soon-Jin Cho, Kyung-Wook Paik, Young-Gil Kim’ The Effect Of Cu-Base Leadframe Oxidation On The Cu/EMC Adhesion ’IEEE Transactions On Components, Packaging, And Manufacturing Technology,1997.
5.Yasuo Tomioka, Junji Miyake’ Oxide Adhesion Characteristic of Lead Frame Copper Alloys ’Proceedings of 47thIEEE Electronic Component and Technology Conference, pp.714-720,1999.
6.Kang Ping Wang, Yonggang Young Huang, Abhijit Chandra, Kai Xiong Hu’ Interfacial Shear Stress, Peeling Stress, and Die Cracking Stress in Trilayer Electronic Assemblies ’IEEE Trans. On Components, Packaging and Manufacturing Technology, Part A, Vol.23,Issue.2,pp.309-316,2000
7.F. Hashagen, R. Borst, T. Vries’ Delamination behavior of spliced Fiber Metal Laminates Part 2. Numerical Investigation ’Composite structures, 46,pp.147-162,1999.
8.Naotaka Tanaka, Makoto. Kitano, Tetsuo Kumazawa’ Evaluation of Interface Delamination IC Packages by Considering Swelling of the Molding Compound due to Moisture Absorption ’Proceedings of 47thIEEE Electronic Component and Technology Conference,pp.84-90,1997.
9.Yizhe Elisa Huang, Debbie Hagen, Glenn Dody, Terry Burnette SPS, Motorola Lnc. Austin, Texas’ Effect Of Solder Reflow Temperature Profile On Plastic Package Delamination ’Twenty-Thurd IEEE/CPMT,pp.105-111,1998.
9.O. Slattery, T. Hayes, W. Lawton, G. Kelly, C. Lyden, J. Barrett, C. Mathuna’ Methods of analyzing thermomechanical stress in plastic packages ’Journal of Materials Technology 54, 199-204 ,1995.
11.P. Stadelmann, K. Leifer, C. Verdon’ EDS and EELS using a TEM-FEG microscope ’Ultramicroscopy, 58, pp.35-41,1995 .
12.A.J. Craven, C. P. Scott, M. MacKenzie, P. Hatto, C. Davies’ Advances in the characterisation of multilayered coatings using electron energy loss spectroscopy in the transmission Electron Microscope ’Surface and Coatings Technology,108-109.1998.
13.Ch. Bichler, T. Kerbstadt, H. C. Langowski, U. Moosheimer’ Plasma-modified interfaces between polypropylene films and vacuum roll-to-roll coated thin barrier layers ’Surface and Coatings Technology,112,pp.373-378,1999.
14.R. W. Carpick, N. Agrait, D.F. Ogletree, M. Salmeron’ Variation of the Interfacial Shear Strength and Adhesion of a Nanometer-Sized Contact ’American Chemical Society, 12, pp. 3334-3340,1996.
15.’ Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading ’ASTM D 3163-1996.
16.’ Standard Test Method for Strength Properties of Adhesively Bond Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading ’ASTM D 3164-1997.
17.’ Standard Test Method for Strength Properties of Adhesively in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal) ’ASTM D 2295-1996.
18.’ Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading ’ASTM D 3528-1998.
19.’ Standard Test Method for Apparent Shear Strength Of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading ’ASTM D 1002-1994.
20. Lalit K. Jain, Yiu-Wing Mai’ Analysis of resin-transfer- moulded single-lap joint ’Composites Science and Technology, 1999
21.Shiuh-Chuan Her’ Stress analysis of adhesively-bonded lap joints ’Composite Structures,1999
22.T. P. Lang, P. K. Mallick’ The effect of recessing on the stresses in adhesively bonded single-lap joint’ International Journal of Adhesion &Adhesives,257-271,1999
23.Ning Hu, Bo Wang, Hideki Sekine, Zhenhan Yao, Guowen Tan’ Shape-optimum design of a bi-material sing-lap joint ’Composite Structures, 315-350,1998
24.Gang Li, Pear1 Lee-Sullivan’ Finite element and experimental studies on single-lap balanced joints in tension ’International Journal of Adhesion & Adhesives, 211-220,2001
25.Kang Yilan, K-H. Laermann, Jia Youquan‘ Experiment analysis for bonded biomaterial beam under bending load ’Measurement, 85-90,1995
26.M. Y. Tsai’ The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joint ’Composite Structures, 123-131,1995
27.M. Y. Tsai, J. Morton’ An experimental investigation of nonlinear deformations in single-lap joint ’Mechanics of Materials,183-194,1995
28.Daniel Post, Bongtae Han, Peter Ifju’ High Sensitivity Moiré ’Springer-Verlag,1994.
29.R. C. Hibbeler’ Mechanics of Materials ’Prentice Hall International,1997
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內校外均不公開 not available
開放時間 Available:
校內 Campus:永不公開 not available
校外 Off-campus:永不公開 not available

您的 IP(校外) 位址是 54.175.70.29
論文開放下載的時間是 校外不公開

Your IP address is 54.175.70.29
This thesis will be available to you on Indicate off-campus access is not available.

紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code