Responsive image
博碩士論文 etd-0721109-143322 詳細資訊
Title page for etd-0721109-143322
論文名稱
Title
光學薄膜應用於摻鉻釔鋁石榴石雙纖衣晶體光纖之研製
The Study and Fabrication of Optical Thin Film on Cr4+:YAG Double-clad Crystal Fiber Based Devices
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
108
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2009-06-21
繳交日期
Date of Submission
2009-07-21
關鍵字
Keywords
放大自發輻射、光放大器、光纖雷射、摻鉻釔鋁石榴石、鍍膜、光學薄膜
optical thin film, optical amplifier, amplified spontaneous emission, fiber laser, coating, Cr:YAG
統計
Statistics
本論文已被瀏覽 5640 次,被下載 0
The thesis/dissertation has been browsed 5640 times, has been downloaded 0 times.
中文摘要
近年來由於光通訊產業的蓬勃發展,使得通訊傳輸上頻寬的需求與日俱增,加上無水光纖技術的突破,使得光通訊用可使用的頻寬拓展為1.3-1.6 μm。以雷射加熱基座生長法生長的Cr4+:YAG雙纖衣晶體光纖(double-clad crystal fiber; DCF),可利用雷射激發光激發足以涵蓋整個通訊波段(1.3-1.6 μm)的自發輻射頻譜,適合發展寬頻光放大器、放大自發輻射(amplified spontaneous emission)光源及可調波長固態雷射(tunable solid-state laser)、生醫檢測光源(optical coherence tomography; OCT)之潛力。
本論文為使用電子槍直接於具異質結構(heterostructure)之摻鉻釔鋁石榴石雙纖衣晶體光纖端面製鍍上介電材質薄膜。藉此成功於晶體光纖端面上蒸鍍上對自發輻射光高反射之介電材質薄膜,用以反射背向放大自發輻射光,提高輸出端之功率。藉由雙向激發架構將輸出端之總放大自發輻射功率提高至1.7 mW(晶纖長度為9.5 cm),比較晶體光纖未製鍍薄膜前之放大自發輻射功率提升1.6倍。光放大器研製方面,採用雙向激發架構並在其晶體光纖一端製鍍高反射膜層使訊號達到雙次傳輸(晶纖長度為8.7 cm),產生訊號(1.4 μm)增益為3.7 dB,系統淨增益達到-0.7 dB。此外,我們亦成功於晶體光纖兩端面製鍍上光學薄膜,形成穩定雷射共振腔,在室溫下有最低的雷射閾值功率為96 mW(晶纖長度為1.6 cm),斜率效率達到6.9%,此掺鉻雷射閾值功率小於任何文獻記述之四倍以上。
Abstract
Recently, with the escalating demands for optical communications, the need for bandwidth in optical communication network has increased. The technology breakthrough in dry fiber fabrication opens the possibility for fiber bandwidth from 1.3 to 1.6 μm. Cr4+:YAG double-clad crystal fiber (DCF) grown by the co-drawing laser-heated pedestal growth method has a strong spontaneous emission spectrum from 1.3 to 1.6 μm. Such fiber is, therefore, eminently suitable for broadband optical amplifier, amplifier spontaneous emission (ASE) light source, tunable solid-state laser, and optical coherence tomography (OCT) applications.
In this thesis, multilayer dielectric thin films were directly deposited by E-gun coating onto the end faces of the heterostructure Cr4+:YAG DCF. In this way we have successfully improved the extracted ASE power by the high reflection (HR) coatings. The backward ASE in the fiber reflected and propagates with gain through the fiber in the forward direction. In dual-pump scheme, as much as 1.7 mW power (DCF length is 9.5 cm) of collimated output ASE was achieved. The dual-pump scheme and HR thin films provided 1.6 time improvements of the ASE output power. For broadband optical amplifier in dual-pump and double-pass scheme, a 3.7-dB gross gain and a 0.7-dB net loss (DCF length is 8.7 cm) at 1.4-μm signal wavelength have been successfully developed with HR coatings onto one of the Cr4+:YAG DCF end faces. In addition, we have successfully developed the Cr4+:YAG DCF fiber laser by direct HR coatings onto fiber end faces. A record-low threshold of 96 mW (DCF length is 1.6 cm) with a slope efficiency of 6.9% was achieved at room temperature. It is more than four times lower than any previously reported Cr4+:YAG lasers.
目次 Table of Contents
中文摘要 i
英文摘要 ii
目錄 iii
圖目錄 v
表目錄 ix

第一章 緒論 1
第二章 光學薄膜之基本原理 3
2.1 光學薄膜之膜特徵矩陣 3
2.2 光學薄膜材料特性與光學常數分析 8
2.3 膜成長理論 18
2.4 光學薄膜之電場分佈 20
第三章 電子槍蒸鍍系統架構及光學薄膜檢測儀器之原理 22
3.1 電子槍蒸鍍系統 22
3.2 光學薄膜檢測儀器 30
第四章 Cr4+:YAG雙纖衣晶體光纖之光譜特性及元件製備33
4.1 晶體光纖生長架構與方法 33
4.2 Cr4+:YAG雙纖衣晶體光纖之光譜特性 39
4.3 樣品包覆及端面處理 48
4.3.1光放大器及放大自發輻射樣品製備 48
4.3.2 雷射樣品製備 54
第五章 Cr4+:YAG雙纖衣晶體光纖雷射、光放大器及放大自發輻射之端面鍍膜與光學特性量測 58
5.1 薄膜於晶體光纖端面出現之問題與處理 58
5.2 雷射之特性量測 61
5.3 光放大器之增益量測 71
5.4 放大自發輻射特性量測 77
5.5 光學薄膜之微觀分析 81
第六章 結論 88

參考文獻 90
中英對照表 93
參考文獻 References
[1] M. L. Fulton, “Application of ion assisted deposition using a gridless end-Hall ion source for volume manufacturing of thin-film optical filter,” Proceedings of SPIE 2253, 374 (1994).
[2] J. R. McNeil, A. C. Barron, S. R. Wilson, and W. C. Herrmann, “Ion- assisted deposition of optical thin film: low energy vs high energy bombardment,” Applied Optics 23, 552 (1984).
[3] H. Kuster and J. Ebert, “Activated reactive evaporation of TiO2 layers and their absorption indices,” Thin Solid Films 70, 43 (1980).
[4] J. J. McNally, G. A. Al-Jumaily, and J. R. McNeil, “Ion-assisted deposition of Ta2O5 and Al2O3 thin film,” Journal of Vacuum Science Technology 3, 437 (1986).
[5] G. A. Al-Jumaily, J. J. McNally, and J. R. McNeil, “Effect of ion assisted deposition on optical scatter and surface microstructure of thin films,” Journal of Vacuum Science Technology 3, 651 (1985).
[6] F. Flory, Emile Pelletier, G. Albrand, and Y. Hu, “Surface optical coatings by ion assisted deposition techniques: study of uniformity,” Applied Optics 28, 2952 (1989).
[7] J. R. McNeil, G. A. Al-Jumaily, K. C. Jungling, and A. C. Barron, “Properties of TiO2 and SiO2 thin film deposited using ion assisted deposition,” Applied Optics 24, 486 (1985).
[8] D. T. Wei, “ Ion beam interference coatings for ultralow optical loss,” Applied Optics 28, 2813 (1989).
[9] 李正中,“薄膜光學與鍍膜技術”,4rd edition,藝軒出版社,民國九十五年。
[10] Y. Y. Liou, ”Determination of the optical constant profiles of thin weakly absorbing inhomogeneous films,” Japanese Journal of Applied Physics 34, 1952 (1995).
[11] R. Swanepoel, “Determination of the thickness and optical constants of amorphous silicon,” Journal of Physics E: Scientific Instruments 16, 1214, (1983).
[12] J. A. Thornton, “Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings,” Journal of Vacuum Science Technology 11, 666 (1974).
[13] K. H. Guenther, “Physical and chemical aspects in the application of thin films on optical elements,” Applied Optics 23, 3612 (1984).
[14] U. Kaiser, M. Adamik, G. Safran, P. B. Barna, S. Laux, and W. Richter, “Growth structure investigation of MgF2 and NdF3 films grown by molecular beam deposition on CaF2 (111) substrates,” Thin Solid Films 280, 5 (1996).
[15] G. D. Nunzio, M. D. Giulio, M. C. Ferrara, M. R. Perrone, L. Protopapa, and L. Vasanelli, “Deposition of SiO2 films with high laser damage thresholds by ion-assisted electron-beam evaporation,” Applied Optics 38, 1237 (1999).
[16] A. F. Stewart and A. H. Guenther, “Laser-induced particle emission as a precursor to laser damage,” Applied Optics 27, 4423 (1998).
[17] D. Milam, W. H. Lowdermilk, F. Rainer, J. E. Swain, C. K. Carniglia, and T. T. Hart, “Influence of deposition parameters on laser-damage threshold of silica-tantala AR coatings,” Applied Optics 21, 3689 (1982).
[18] O. Arnon and P. Baumeister, “Electric field distribution and the reduction of laser damage in multilayers,” Applied Optics 19, 1853 (1980)
[19] E. Hucker, H. Lauth, and P. Weissbrodt, “Review of structural influence on the laser damage threshold of oxide coatings,” Proceedings of SPIE 2714, 316 (1996).
[20] S. C. Seitel and J. O. Porteus, “Laser damage round-robin testing (1.06-μm)with 13-nsec pulse duration and 40-μm spot size,” Applied Optics 23, 3767(1984).
[21] K. Rajasree, P. Radhakrishnan, V. P. N. Nampoori, and C. P. G. Vallabhan,“Determination of the laser-induced damage threshold of bulk polymer samples at 1.06 μm using the pulsed photothermal deflection technique,”Laser Division, Department of Physics, Cochin University of Science and Technology 4, 591 (1993).
[22] 呂登復,“實用真空技術”,國興出版,民國九十一年。
[23] 吳秀菁,汪若文,林美吟,“儀器總覽-材料分析儀器”,行政院國家科學委員會精密儀器發展中心,民國八十七年。
[24] I. T. Sorokina, S. Naumov, E. Sorokin, and E. Wintnter, “Directly diode-pumped tunable continuous-wave room-temperature Cr4+:YAG laser,”Optics Letter 24, 1578-1580 (1999).
[25] G. A. Magel, M. M. Fejer, and R. L. byer, “Quasi-phase-matched second harmonic generation of blue light in periodically LiNbO3,” Applied Physics Letters 56, 108 (1990).
[26] D. B. Gasson and B. Cockayne, “Oxide crystal growth using gas laser,”Journal of Materials Science 5, 100 (1970).
[27] S. Kück, J. Koetke, K. Petermann, U. Pohlmann, and G. Huber,“Spectroscopic and laser studies of Cr4+:YAG and Cr:Y2SiO5,”OSA Proceedings on Advanced Solid-State Lasers 15, 334-338 (1993).
[28] H. Eilers, W. M. Dennis, W. M. Yen, S. Kuck, K. Peterman, G. Huber, and W. Jia, “Performance of a Cr:YAG laser,” IEEE Jouenal of Quantum Electronics 29, 2508 (1993).
[29] S. Kuck, K. Petermann, and G. Huber, “Spectroscopic investigation of the Cr4+-center in YAG,” OSA Proceedings on Advanced Solid-State Lasers 10,92-94 (1991).
[30] B. M. Tissue, W. Jia, L. Lu, and W. M. Yen, “Coloration of Chromium-doped Yttrium Aluminum Garnet single-crystal fibers using a divalent codopant,”Journal of Applied Physics 70, 3775 (1991).
[31] A. Sennaroglu, “Analysis and optimization of lifetime thermal loading in continuous-wave Cr4+-doped solid-state lasers,” Journal of the Optical Society of America 18, 1578-1586 (2001).
[32] P. M. W. French, N. H. Rizvi, and J. R. Taylor, “Continuous-wave mode-locked Cr4+:YAG laser,” Optics Letter 18, 39 (1993).
[33] D. J. Ripin, C. Chudoba, J. T. Gopinath, J. G. Fujimoto, E. P. Ippen, U. Morgner, F. X. Kärtner, V. Scheuer, G. Angelow, and T. Tschudi, “Generation of 20-fs pulses by a prismless Cr4+:YAG laser,” Optics Letter 27, 61 (2002).
[34] S. Ishibashi and K. Naganuma, "Diode pumped Cr4+:YAG single crystal fiber laser," in Advanced Solid-State Lasers, OSA Technical Digest, Davos, Switzerland, MD4 (2000).
[35] D. Huang, E. A. Swanson, C. P. Lin, J. S. Schuman, W. G. Stinson, W. Chang, M. R. Hee, T. Flotte, K. Gregory, C. A. Puliafito, and J. G. Fujimoto,“Optical coherence tomography,” Science 254, 1178 (1991).
[36] http://www.thinfilmproducts.umicore.com
[37] K. Cai, M. Muller, J. Bossert, A. Rechtenbach, and K. D. Jandt, “Surface structure and composition of flat titanium thin films as a function of film thickness and evaporation rate,” Applied Surface Science 250, 252 (2005).
[38] H. Niederwald, “Low-temperature deposition of optical coatings using ion assistance,” Thin Solid Films 21, 377 (2000).
[39] C. C. Lai, H. J. Tsai, K. Y. Huang, K. Y. Hsu, Z. W. Lin, K. D. Ji, W. J. Zhuo, and S. L. Huang, “Cr4+:YAG double-clad crystal fiber laser,” Optics Letters 33, 2919 (2008).
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內校外均不公開 not available
開放時間 Available:
校內 Campus:永不公開 not available
校外 Off-campus:永不公開 not available

您的 IP(校外) 位址是 18.212.87.137
論文開放下載的時間是 校外不公開

Your IP address is 18.212.87.137
This thesis will be available to you on Indicate off-campus access is not available.

紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code