Responsive image
博碩士論文 etd-0725107-172410 詳細資訊
Title page for etd-0725107-172410
論文名稱
Title
適合台灣電子加工服務(EMS)的產業特性與產品別研究
None
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
72
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2007-06-24
繳交日期
Date of Submission
2007-07-25
關鍵字
Keywords
台灣電子加工服務業、產業別、層級分析
AHP, EMS, the industrial characteristic
統計
Statistics
本論文已被瀏覽 5676 次,被下載 8
The thesis/dissertation has been browsed 5676 times, has been downloaded 8 times.
中文摘要
摘要:
台灣本地之電子加工服務(EMS),近年來IT產業外移與大陸成為世界主要工廠後,台灣EMS產業在台灣部份急速萎縮,但新興產業與少量多樣的產品在台灣卻找不到適合的台灣電子加工行業(EMS),使得台灣研發中心沒有合適的配合廠商,以致於台灣的研發中心外移或延長開發時間,降低競爭力。因此本研究便是針對台灣電子加工服務行業 (EMS)適合在台灣發展的產業特性與產品別予以探討。
在經由專家學者與熟悉此行業的先進,針對適合「台灣電子加工服務行業(EMS)的產業特性與產品別研究」的問卷調查後,並根據研究結果提出以下之看法。
1. 在適合台灣電子加工服務行業(EMS)的產業特性,在評估優先順序後,排序為(1)利基型產業、(2)與IC產業結合、(3) 提供研發中心生產服務、(4)與光電產業結合、(5)與新興產業結合。
2. 在適合台灣電子加工服務行業之產品別在評估後與排序後,排序為(1) IC產業之Flip-Chip、(2) 研發中心生產服務之小型研發公司供應鏈整合、(3)光電產業之數位電視生產、(4) 利基產業之智慧型手機、(5) IC產業之Flash-Memory 、(6) 研發中心生產服務之國防工業須之電子產品組裝、(7) IC產業之RAM Module 、(8) 利基產業之伺服器級主機板、(9) 利基產業之Wi-Max手機、(10) 研發中心生產服務之專業Pilot-Run服務、(11)光電產業之大尺寸TV生產、(12) 新興產業之太陽能電池控制板 、(13) 利基產業之VoIP手機、(14)光電產業之小尺寸Pilot run 、(15)新興產業之IC設備控制板、(16)新興產業之基地台通訊設備主板、(17)車用電子的生產組裝。
3. 各EMS應依各公司的競爭優勢,並參考上述研究結果,選擇最合適的行業與產品別來作為公司方向。
4. 此項策略決策方式先由市場、客户與外在環境發展之現況透過市場上下游之問卷分析找出外在之市場機會也可成為另一種市場策略決定之模式
Abstract
Abstract :
Taiwan Electronic Manufacturing Service (EMS) field , in recent years outside the IT industry moved after the mainland becomes the world main factory, the Taiwan EMS industry withered rapidly in the Taiwan part. But the new niche product company and the few diverse products R&D center actually could not find suitable Taiwan electronic manufacturing service field (EMS) in Taiwan, caused the Taiwan research and development center don’t find the appropriate coordination manufacturer, in the meantime that Taiwan's research and development center moved or the extension development time and reduced the its competitive advantage . Therefore this research is focused on Taiwan Electronic Manufacturing Service industry (EMS) to look for to suit the industrial characteristic and the product which develops in Taiwan.
In with is familiar with this profession by way of the experts advanced, after suits “the Taiwan Electronic Manufacturing Service industry (EMS) industrial characteristic and the product” the questionnaire survey below, and proposes the view according to the findings. In suits Taiwan Electronic Manufacturing Service industry (EMS) the industrial characteristic, after the appraisal order of priority, the sorting result is (1) Niche Product industry, (2) the IC industrial agglomeration, (3) provides the research and development center production service, (4) and the photo-electricity industrial agglomeration, (5) and the emerging industrial agglomeration. In suits product of the Taiwan electron processing service industry don't after the appraisal after sorting, sorts(1) IC industrial Flip-Chip assembly, (2) research and development center production and supplier chain service, (3) Digital LCD TV assembly, (4) smart phone assembly, (5) IC industrial Flash-Memory card assembly (6) Defense industrial electronic product assembly, (7) IC industrial RAM of Module assembly ,(8) server Mother board assembly, (9) Wi-Max of handset assembly , (10) Pilot-Run service for R&D center, (11) photo-electricity industry the great size LCD panel production, (12) solar cell control panel, (13) Vo-IP of handset, (14) small size LCD panel pilot-run service (15) IC equipment control panel assembly , (16) base station of communication equipment assembly, (17) vehicle electronic product assembly.
Each EMS should depend on various companies competitive advantage, and refers to the above findings, chooses the most appropriate profession and the product do not come to take the company direction. This strategy decision-making way first present situation of by the market, the customer and the external environment development penetrates questionnaire of analysis the market upstream and downstream to discover the external market opportunity also of to be possible to become pattern of the another kind of market strategy decision
目次 Table of Contents
目錄
第一章 緒論 8
第一節 研究背景與動機 8
第二節 研究目的 9
第三節 研究範圍 10
第四節 研究流程 11
第二章 產業背景說明 12
第一節 EMS 產業 12
第二節 台灣電子加工服務產業現況與發展趨勢 14
第三節 適合台灣電子加工服務之產業與特性 19
第四節 適合台灣電子加工服務之產品別 21
第三章 文獻探討研究方法與研究設計 24
第一節 適合台灣電子加工服務(EMS)的產業特性與產品別 24
第二節 層級分析法(AHP) 25
第四章 研究結果分析與探討 40
第一節適合台灣電子加工服務(EMS)的產業特性與產品別之評估因素 40
第二節 適合台灣電子加工服務(EMS)的產業特性與產品別評估準則 42
一、與利基產業結合 42
二、「與IC產業結合」 43
第三節 評估準則整體權重 47
第四節 統計整理 50
第五章結綸與建議 53
第一節 結論 53
第二節 研究貢獻 54
一、對學術界的貢獻 54
二、對實務界的貢獻 54
第三節 建議-台灣電子加工服務(EMS)廠的建議 55
第四節 研究範圍之界定 55
一、實證研究方法限制之界定 55
二、填答人員之界定 55
三、樣本數的之界定 55
參考文獻 56
ㄧ 、中文部份 56
二、英文部分 57
三、網站部分 61
第一單元、專家個人基本資料 62
第二單元、技術創新過程影響因子之層級結構 63
第三單元、填答說明: 64
第四單元、問卷內容 65

附件(一) 適合台灣電子加工服務(EMS)的產業特性與產品別研究』之研究問卷 62
附件二『附表目錄』 71
參考文獻 References
參考文獻
ㄧ 、中文部份
1. 尤惠法, 2005, 3C 機殼廠技術創新過程之關鍵成功因素, 國立中山大學企業管理研究所未出版碩士論文。
2. 林耿弘,,OEM/ODM/OBM名詞釋疑,EMS產業報,2000第四期三月,華泰電子-成品事業中心出版
3 俞玉敏 , 2000,台灣個人電腦產業分工至整合趨勢之研究─契約製造服務(CEM)廠商為例,銘傳大學管理科學研究所未發表的碩士論文。
4. 陳榮傑, 1997, 3C 產業通路競合策略個案探討, 國立中興大學企業管理研究所碩士論文。
5. 黃宏義譯, 1985, 策略家的智慧, (大前研一.1985), 長河。
6. 黃荷婷, 2003, 研發團隊成員目標導向與創新行為、創新績效-自我效能與集體效能的中介效果, 東吳大學企業管理學系未出版碩士論文。
7. 電子時報,2002/07/30,EMS西風東漸 日本生產體制開新頁(本訊)。
8. 謝坤霖,2003,國內非營利休憩事業經營關鍵成功因素之探討-以救國團墾丁青年活動中心為例, 中華大學科技管理研究所未出版碩士論文。

二、英文部分
1. Aaker, D. A. 1988.Strategic Market Management. NY: John Wiley & Sone.
2. Abernathy, W. & Clark,K.B.1985. Mapping the Winds of Creative Destruction. Research Policy , Vol.14, pp.2-22.
3. Alain, Bienayme.1986. The Dynamics of Innovation. Int. J. Technology Management . Vol. 1(1/2), pp.133-159.
4. Antoniou, P. & Ansoff, H. I. 2004.Strategic Management of Technology. Technology Analysis & Strategic Management . Vol. 16(2), pp. 275-291.
5. Bamberger, Ingolf .1989.Developing Completive Advantage in Small and Medium-size Firms. Long Range Planning , vol.22, p85. Printed in Great Britain.
6. Barbosa, R. R. 1985. Innovation in a Mature Industry, Ph.D. dissertation, Columbia University.
7. Boynton, Andrew C. & Zmud, Robert W,.1984. An Assessment of Critical Success Factors. Sloan Management Review, pp.17-27.
8. Burns, T. and Stalker, G. M. 1981.The management of innovation . London : Tavistock.
9. Claver, E. & Garcia D..;& Llopis, J. & Molina, H. 1998. Organizational Culture for Innovation and New Technological Behavior. The Journal of High Technology Management Research . 86 Vol. 9(1), pp.55-68.
10. Damanpour, F. & Evan, W. M.1984. Organizational Innovation & Performance: The Problem of Organizational Lag. Administrative Science Quarterly . Vol.29, pp.392- 409.
11. Daniel, Ronald D. 1961.Management Information Crisis. Harvard Business Review. September 1961, pp.111-121.
12. Ferguson, Charles R. and Dickinson, Roger .1982.Critical Success Factor For Directors in the Eighties. Business Horizon , May.
13. Figueiredo, P.N. 2002. Does Technological Learning Pay off? Inter-firm Differences in Technological Capability-Accumulation Paths and Operational Performance Improvement. Research Policy . Vol. 31(1), pp. 73-94.
14. Galende, J. 2004. Patterns of Innovation among Firms and Their Relationship with Innovative Results. International Journal of Entrepreneurship and Innovation Management. Vol.4 (1), pp.73-97.
15. Garud, R. & Karno, E, P. 2003. Bricolage versus Breakthrough: Distributed and Embedded Agency in Technology Entrepreneurship. Research Policy . Vol.32 (2), pp.277-300.
16. Gobeli, D. H. & Brown, D. J..1993 .Improving the Process of Product Innovation. Research Technology Management . Vol. 36(2), pp.38-44.
17. Gupta, A. K .& Raj, S. P. & Wilemon, D. 1986. A Model for Studying R & D – Marketing Interface in the Product Innovation. Journal of Marketing . April, pp.7-17.
87
18. Hofer, Charles W. & Schendel, Dan. 1978. Strategy Formulation: Analytical Concepts. New York: West Publishing.
19. Howell, J. M. & Boies, K .2004. Champions of Technological Innovation: The Influence of Contextual Knowledge, Role Orientation, Idea Generation, and Idea Promotion on Champion Emergence. The Leadership Quarterly. Vol.15 (1),
pp.123~143.
20. Ketelhohn, W. 1998. What is a Key Success Factor? . European Management Journal , Vol. 16, No. 3, pp. 335-340.
21. Leidecker, Joel K. & Bruno, Albert V. 1984. Identifying and Using Critical Success Factors. Long Range Planning . Vol.17 No.1, pp.23-32.
22. Marquis, Donald G. 1972. The Anatomy of Successful Innovation. Managing Advancing Technology . Vol. 1, pp35-48
23. Martin, J. M. 1987. Strategic Planning for Manufacturing. Manufacturing Engineering. Vol.99 (5), pp.45-50.
24. Modesto, A. Maidique & Patch, Peter. 1982.Corporate strategy and Technology Policy. In Tushman & Moore Eds. Management of Innovation. Pitman Books Ltd., pp.283-285.
25. Nonaka, I .1990. Redundant, Overlapping Organization: A Japanese Approach to Managing the Innovation Process. California Management Review . Vol. 32(3), pp.27-38.
26. Papadakis, V. & Bourantas, D. 1998. The Chief Executive Officer as Corporate Champion of Technological Innovation: An Empirical Investigation. Technology Analysis & Strategic Management . Vol. 10(1), pp.89-109.88
27. Porter, M. E. 1980. Competitive Strategy . New York:The Free Press.
28. Rockart, John F. 1980. Chief Executives Define Their Own Data Needs. Harvard Business Review , May, pp.81-93.
29. Ahlbrandt, Roger, Jr. & Blair, Andrew R..1986. What It Takes for Large Organizations To Be Innovative. Research Management . Vol. 29(2), pp.34-37.
30. Rothwell, R. 1994. Inssue in User-Producer Relations in the Innovation Process: The Role of Government. International Journal of Technology Management . Vol. 9(5-7), pp.629-649.
31. Saaty, Thomas L.1980, Analytic Hierarchy Process , 9th,New York; McGraw-Hill.
32. Souitaris, V. 2002 Firm-specific Competencies Determining
Technological Innovation: A Survey in Greece. R&D Management . Vol.: 32(1), pp.61-77.
33. Stock, G. N. & Greis, N. P. & Fischer, W. A. 2002. Firm Size and Dynamic Technological Innovation .Technovation . Vol.22 (9), pp. 537-549.
34. Suzuki, J. & F. Kodama, F .2004. Technological Diversity of Persistent Innovations in Japan: Two Case Studies of Large Japanese Firms. Research Policy . Vol.33(3) ,pp.531-549. 泌必. Thompson, A. A. & Strickland, A. J. 1998. Strategic
Management Concept and Cases , New York: McGraw Hill.
36. Tushman, M. L. & Anderson, P. 1986. Technological discontinuities and organizational environment. Administrative Science Quarterly . Vol 31, pp.439-435.89
37.Van de Ven, Andrew H.1986.Central Problems in the management of Innovation. Management Science . Vol.32 (5).
38.Voelcker,John & Wallich, Paul & Zorpette, Glenn. 1986, Personal Computers: Lessons Learned PC Design: Architecture, PC Design: Manufacturing, IEEE Spectrum 1986 23(5) pp.44-61
三、網站部分
1. 李素華,2002,「產學研交流法制-談研發人員擴散與獎勵機制」,技術尖兵,
September(線上資料),
http://www.st-pioneer.org.tw/modules.php?name=magazine&pa=showpage
&tid=1708。
2. 黃淮琪,1999,「果芸:創新研發應視產業不同而有別」,技術尖兵,January
(線上資料),
http://www.st-pioneer.org.tw/modules.php?name=magazine&pa=showpage
&tid=2255
3. 鄭婉羽,2004,東森新聞報(線上資料),
http://www.ettoday.com/2004/12/02/334-1721777.htm,December,02
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內一年後公開,校外永不公開 campus withheld
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus:永不公開 not available

您的 IP(校外) 位址是 3.80.173.25
論文開放下載的時間是 校外不公開

Your IP address is 3.80.173.25
This thesis will be available to you on Indicate off-campus access is not available.

紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code