Responsive image
博碩士論文 etd-0729102-113946 詳細資訊
Title page for etd-0729102-113946
論文名稱
Title
諧波驅動器機電整合系統之動態響應
Dynamic Responses of the Electro-Mechanical Integrated Harmonic Drive Systems
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
105
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2002-07-13
繳交日期
Date of Submission
2002-07-29
關鍵字
Keywords
動態響應、諧波驅動器、機電整合
dynamic response, harnmonic drive
統計
Statistics
本論文已被瀏覽 5759 次,被下載 18
The thesis/dissertation has been browsed 5759 times, has been downloaded 18 times.
中文摘要
摘要
諧波驅動器 ( Harmonic drive ) 為一種高減速比的傳動裝置,擁有質量輕、零件少、體積小、負載大等優點。在高精度的精密機械傳動系統,如機器手的驅動系統減速機構,已為不可或缺的傳動元件。文中將結合馬達與諧波驅動器兩個不同的子系統,利用拉格朗日方程式 ( Lagrange’s equation ) 建立整體機電系統的運轉模式。本文分就數值模擬與實驗驗證兩方面,探討考慮馬達動態特性之諧波驅動器系統的動態響應。並採用四齒差杯式諧波驅動器與二齒差環式兩不同諧波驅動器,探討兩者對系統動態響應的影響。數值模擬方面,係採用六階藍日卡達法 ( Runge-Kutta method ) 進行數值求解。配合自行設計之模組式測試台,分析比較數值模擬與實驗測試結果,以驗證數值模擬的可靠性與可用性。




Abstract
Abstract
The harmonic drive mechanism has been used wildly in industrial robots. High reduction ratio, few components, and quiet torque transfer are the advantages of this device. In this thesis, the dynamic characteristic of an integrated DC motor and harmonic driver system is investigated. The dynamic equations of the harmonic drive systems are derived by applying Lagrange’s equation. Two different harmonic driver designs, i.e. a cup-type with two teeth difference and a circular type with four teeth difference are used in the analysis. The system responses are simulated by employing the sixth order Runge-Kutta method. Comparison between numerical simulation results and experimental results, it indicates that the proposed model is feasible and accurate for simulating the dynamic response of an electro-mechanical integrated harmonic drive system.




目次 Table of Contents
第一章 緒論 1
1-1 前言 1
1-2 文獻回顧 5
1-3 章節與組織 8
第二章 諧波驅動器系統數學模式推導 9
2-1 諧波驅動器簡化模式 9
2-2 諧波驅動器系統之運動方程式 16
2-3 驅動馬達轉速與負載模式 19
2-3-1 直流馬達轉速與負載變化模式 19
2-3-2 伺服馬達轉速與負載關係模式 23
2-4 諧波驅動器機電整合系統動態響應數值解析 27
第三章 實驗驗證與理論模擬 30
3-1 諧波驅動器系統測試台之配置 30
3-2 系統組件參數抽取 40
3-3 實驗與數值結果之分析與比較 48
第四章 結論 68
附錄A 諧波驅動器動態誤差參數抽取 69
附錄B 二階微分方程降階處理 74
附錄C 加速度計串並聯用於組件動態參數量測 78
參考文獻 88
參考文獻 References
參考文獻

Abdelraheim, A. and Seireg A., 1995, “Vibratory Response and Stability of Systems Driven by Harmonic Drives,” Machine Vibration, Vol. 3, pp. 192-199.

Charlson, J. H., 1985, “Harmonic Drives for Servomechanisms,” Machine Design, Vol. 57, No. 1, pp. 102-106.

Chang, S. H. and Chung, S. D., 1998, “Analysis of the Kinematic Error of a Face-Gear Harmonic Drive,” Journal of the Chinese Society of Mechanical Engineers, Vol. 191,No 4, pp. 359-367.

Chedmail, P. and Martineau, J. P., 1996, “Characterization of Friction Parameters of Harmonic Drive Actuators,” International Conference on Dynamics and Control of Structures in Space, Vol. 1, pp. 567-581.

Doty, K. L., Melchiorri, C., and Bonivento, C., 1993, “Theory of Generalized Inverses Applied to Robotics,” International Journal of Robotics Research, Vol. 12, No. 1, pp. 1-19.

Golder, I. and Hashimoto, M. 1998, “Torque Control of Harmonic Drive Gears with Build-In Sensing,” Industrial Electronics Society, Proceedings of the 24th Annual Conference of the IEEE, Vol. 3, pp. 1818-1823.

Hashimoto, M. and Kiyosawa, Y, 1993,“A Torque Sensing Technique for Robots with Harmonic Drives,” IEEE, Robotics and Automation , Vol. 91, pp. 108-116.

Hess, D. P. and Soom, A., 1990, “Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities,” ASME, Journal of Tribology, Vol. 112, No. 1, pp. 147-152.

Hidaka, T., Ishida, T., Zhang, Y., Sasahara, M. and Tanioka, Y, 1990,“Vibration of a Strain Wave Gearing in an Industrial Robot,” Proceedings of the 1990 International Power Transmission and Gearing Conference - New Technology Power Transmission, New York, pp. 789-794.

Hsia, L., 1988, “The Analysis and Design of Harmonic Gear Drives,” Proceedings of 1988 IEEE International conference on Systems, Man and Cyberneetics, Vol. 1, pp. 616-619.

Jeon, H. S. and Oh, S. H., 1999, “A Study on Stress and Vibration Analysis of Steel and Hybrid Flexspline for Harmonic Drive,” Composite Structures , Vol. 47, pp. 827-833.

Jeong, K. S. and Oh, S. H., 1995, “Development of the Composite Flexspline for a Cycloid -Type Harmonic Drive Using Net Shape Manufacturing Method,” Composite Structures , Vol. 32, pp. 557-565.

Kicanski, N., Golddenberg, A., and Jia, S., 1993, “An Experimental Study of Nonlinear Stiffness, Hysteresis, and Friction Effects in Robot Joint with Harmonic Drives and Torque Sensors,” Proceeding of the Third International Symposiumon Experimental Robotics, Vol. 1, pp. 147-154.

Komdo, K. and Takada, J., 1990, “Study on Tooth Profiles of the Harmonic Drive,”Journal of Mechanical Design, Vol. 1, pp. 112-131.

Koose, V., 1997, “Analytical Investigation of the Change in Phase Angle between the Wave Generator and the Teeth Meshing Zone in High-Torque Mechanical Harmonic Drives,” Mech. Mach. Theory, Vol. 32, pp. 533-538.

Maiti, R. and Roy, A. K., 1996, “Minimum Tooth Difference in Internal - External Involute Gear Pair,” Mech. Mach. Theory, Vol. 5, No. 4, pp. 475-485.

Marilier, T. and Richard, J. A., 1989, “Non-linear Mechanic and Electric Behavior of a Robot Axis with a Harmonic Drive Gear,” Robotics and Computer Integrated Manufacturing, Vol. 5, No. 2, pp. 129-136.

Musser, C. W., 1960, “The Harmonic Drive:Breakthrough in Mechanical Drive Design,” Machine Design, Vol. 32, No. 8, pp. 160-173.

Oh, S. H. and Chang, S. H., 1997, “Improvement of the Dynamic Properties of a Steel -Composite Hybird Flexspline of a Harmonic Drive,” Composite Structures, Vol. 38, No. 1, pp. 251-260.

Seyfferth, W., Maghzal, A. J., and Angeles, J., 1995, “Nonlinear Modeling and Parameter Identifications of Harmonic Drive Robotic Transmissions,” Proceeding of IEEE International Conference on Robotic and Automation, Vol. 3, pp. 3027-3032.

Taghirad, H. D. and , P. R., 1996, “An Experimental Study on Modeling and Identification of Harmonic Drive Systems,” Proceedings of the 35th Conference on Decision and Control, Kobe Japan, pp.4725-4730.

Taghird, H. D. and , P. R., 1997, “Intelligent Torque Sensing and Robust Torque Control of Harmonic Drive Under Free-Motion,” Proceedings of IEEE International Conference on Robotics and Automation, Vol. 2, pp. 1749-1754.

Taghird, H. D. and , P. R., 1997, “ Robust Torque Control of Harmonic Drive Under Constrained Motion,” Proceedings of IEEE International Conference on Robotics and Automation, Vol. 1, pp. 248-253.

Taghird, H. D., Helmy, A. and , P. R., 1997, “Intelligent Build-In Torque Sensor for Harmonic Drive System,” Proceedings of the 1997 IEEE Instrumentation and Measurement Technology Conference , Vol. 1, pp. 969-974.

Taghird, H. D. and , P. R., 1998, “Modeling and Parameter Identification of Harmonic Drive Systems,” ASME, Journal of Dynamic Systems, Measurement, and Control, vol. 120, pp. 439-444.

Tuttle, T. D. and Seering, W., 1993, “Modeling a Harmonic Drive Gear Transmission,” Proceeding of IEEE International Conference on Robotics and Automation, Vol. 2, pp. 624-629.

Tuttle, T. D. and Seering, W. P., 1996, “A Nonlinear Model of a Harmonic Drive Gear Transmission,” IEEE Transaction on Robotics and Automation, Vol. 12, No. 3, pp. 368-374.

李適中,1991,“ 直流馬達速度控制,伺服系統 ”,全華圖書。

范又功,曹炳和,1995,“ 諧波齒輪傳動技術手冊 ”, 國防工業出版社(北京)。

胡晉哲,2001,“ 不同力矩補償機構對滾子凸輪系統動態特性影響之分析 ”, 國立中山大學機械工程研究所碩士論文。

陳其俊,1996,“ 加速規串並聯用於聯軸器之剛度量測 ”,國立中山大學機械工程研究所碩士輪文。

傅銘田,2000,“ 諧波齒輪之動態響應 ”,國立中山大學機械工程研究所碩士論文。

電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內一年後公開,校外永不公開 campus withheld
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus:永不公開 not available

您的 IP(校外) 位址是 44.204.34.64
論文開放下載的時間是 校外不公開

Your IP address is 44.204.34.64
This thesis will be available to you on Indicate off-campus access is not available.

紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code