Responsive image
博碩士論文 etd-0815100-210938 詳細資訊
Title page for etd-0815100-210938
論文名稱
Title
高精度平面檢測軟體開發
Development of High Accuracy 2-D Inspection Software
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
51
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2000-06-02
繳交日期
Date of Submission
2000-08-15
關鍵字
Keywords
次像素精度、影像處理、平面檢測
image processing, sub-pixel accuracy, 2-D detection
統計
Statistics
本論文已被瀏覽 5647 次,被下載 2857
The thesis/dissertation has been browsed 5647 times, has been downloaded 2857 times.
中文摘要
CCD (Charge Coupled Device) 以其體積小、影像清晰、價格便宜的優點,是近幾年來快速發展的電腦視覺系統的影像擷取單元,尤其在平面的物體影像擷取方面,CCD更有其獨到之處,因此大量被採用在業界產品檢測的工作上。

在利用CCD影像從事產品檢驗的工作上,主要分為兩個方向,第一種是針對物體的種類、數量、位置和缺陷的檢測,第二種是針對物體本身性質的計算,如線、圓的尋找、物體的面積、直徑、真圓度、線的交角和兩物體的相對距離等…。

本文研究目的即在現有理論下,對於圖形複雜度不高但需高精度之檢測條件(如兩物體距離檢測、圓之直徑、真圓度檢測)尋找一適合高精度演算法,在速度和精度之考量下,以較低成本的CCD檢測設備,達到次像素精度的精確度。
Abstract
The CCD sensors have the advantage for small size clear image and low prices, It is the image capture unit of computer-vision system which developed fast in the past
years, especially in the 2-D image capture CCD sensors are better then another sensors, so in the industry it be used on products detection .

There are two different sections on using CCD sensors to detect products,the first section is about the detection of what kind of objects amount of objects and position of objects, the second section is about looking for lines 、circles 、areas of objects、diameter、circularity and the angles between two lines
The research purpose is finding a high accuracy algorithmic with low complicacy and high accuracy conditions; the accuracy can reach the sub-pixel accuracy with low price facilities and high speed .
目次 Table of Contents
目 錄
摘要
目錄
第一章 緒論 …………………………………………1
1.1.前言…… …………………………………………1
1.2 研究動機與目的...........................1
1.3.論文架構……………………………...........3

第二章 文獻回顧…….……………………………..4
2.1. CCD檢測系統架構….......………………….4
2.1.1 CCD感測器…………………………………...4
2.1.2 鏡頭……………..……………………………5
2.1.3 打光方式…………….……………….………5
2.2.數位影像處理……………………………………6
2.2.1 空間領域影像處理….………………….……6
2.2.2 影像分割…………………………………… 14
2.3.線與圓之檢測法則………….…………………15
2.3.1 影像簡化處理.........................15
2.3.2 建立線與圓的方程式……………….......18

第三章 高精度檢測軟體設計規劃…............22
3.1.提高檢測精度研究……………………….....23
3.2.檢測環境設計…………………….……………29

第四章 模擬與實驗結果…………...…………… 33
4.1理想影像之檢測…………………………………33
4.2 實際圖形檢測………………………………….44
4.3 實驗結果分析………………………………….50

第五章 貢獻與未來展望…………………....……51
5.1 本論文之貢獻……………………...………51
5.2 未來展望………………….........………51

參考文獻
參考文獻 References
參考文獻

1.Andres H.and Gerard M.,”Detection of Intensity Changes with Subpixel Accuracy Using Laplacian-Gaussian Masks ”,IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE 1986, Vol 12, Iss 3, pp 213-222

2.Bernsen J.,” An Objective and Subjective Evaluation of Edge-Detection Methods in Images”, PHILIPS JOURNAL OF RESEARCH 1991, Vol 46, Iss 2-3, pp 57-94

3.Elmabrouk.A and Aggoun.A ,”Edge-Detection Using Local Histogram Analysis”,ELECTRONICS LETTERS 1998, Vol 34, Iss 12, pp 1216-1217

4.Goshtasby A. and Shyu H.,”Edge-Detection by Curve-Fitting”, IMAGE AND VISION COMPUTING 1995, Vol 13, Iss 3, pp 169-177

5.Ian O.and Philip G.,”Practical first-difference edge detection with subpixel accuracy”,image and vsion computing 1987,Vol 5, Iss 4, pp 117-185

6.Kisworo M. Venkatesh S. and West G.,”Modeling Edges at Subpixel Accuracy Using the Energy Approach”,IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE 1994, Vol 16, Iss 4, pp 405-410

7.Liu D.and Ehrich R.,”Subpixel Edge Location in Binary Images Using Dithering”,IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE 1995,

8.Matalas I. Benjamin R. and Kitney R.,”An Edge-Detection Technique Using the Facet Model and Parameterized Relaxation Labeling”, IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE 1997, Vol 19, Iss 4, pp 328-341

9.Mehrotra R. and Zhan S.,”Computational Approach to Zero-Crossing-Based 2-Dimensional Edge-Detection”, GRAPHICAL MODELS AND IMAGE PROCESSING 1996, Vol 58, Iss 1, pp 1-17

10.Mehrotra R.and Zhan S.,” Computational Approach to Zero-Crossing-Based 2-Dimensional Edge-Detection”,GRAPHICAL MODELS AND IMAGE PROCESSING 1996, Vol 58, Iss 1, pp 1-17

11.Park D.,”Multiresolution Edge-Detection Techniques”,PATTERN RECOGNITION 1995, Vol 28, Iss 2, pp 211-229

12.Pivovaroff M. Jones S.and Bautz M.,” Measurement of the Subpixel Structure of Axaf Ccds”,IEEE TRANSACTIONS ON NUCLEAR SCIENCE 1998, Vol 45, Iss 2, pp 164-175

13.Robert M.,”Digital Step Edges from Zero Crossing of Second Directional Derivatives”, IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE 1984, Vol 26, Iss 2, pp 295-306

14.Siuzdak J.,”A Single Filter for Edge-Detection”,PATTERN RECOGNITION 1998, Vol 31, Iss 11, pp 1681-1686

15.Sugata G.and Rajiv M.,“Orthogonal Moment Operators for Sibpixel Edge Detection”,PATTERN RECOGNITION 1993, Vol 26, Iss 2, pp 295-306

16.Yoshita K. and Kitamoto S., “Direct Measurement of the CCD with a Subpixel Resolution by Using a New Technique”,IAU SYMPOSIA 1998, Iss 188, pp 339-340

17.Zhang Y.and Webber R.,”A Windowing Approach to Detecting Line Segments Using Hough Transform”,PATTERN RECOGNITION 1996, Vol 29, Iss 2, pp 255-265

18.陳建宏,利用方向性法則實現影像邊緣檢測之研究,碩士論文,中正理工學院電機工程研究所,民國八十一年

19.蘇慶華,數位影像技術與尺寸及形狀檢測之研究,碩士論文,中央大學機械工程研究所,民國八十五年

20.陳仁傑,CCD感測器在電腦連接器上的應用,碩士論文,中央大學機械工程研究所,民國八十六年

21.蔡夢儒,應用電腦視覺於透明容器內義務之自動化檢測,碩士論文,交通大學工業工程研究所,民國八十四年

22.盧祥俊,應用於模式影像編碼上的臉部特徵萃取方式,碩士論文,清華大學資訊科學研究所,民國八十六年

23.李孟融,成形砂輪磨耗量的線上非接觸量測法,碩士論文,台灣大學機械工程研究所,民國八十八年

24.劉敦行,細長型物體之影像辮識,碩士論文,中央大學電機工程研究所,碩士論文,民國八十六年

25.潘閩志,電腦視覺在定位量測上之應用研究,碩士論文,中原大學機械工程研究所,民國八十七年

電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內校外完全公開 unrestricted
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus: 已公開 available


紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code