Responsive image
博碩士論文 etd-0827101-111225 詳細資訊
Title page for etd-0827101-111225
論文名稱
Title
純銅經等徑轉角擠型之低溫退火和機械性質
none
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
71
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2001-07-20
繳交日期
Date of Submission
2001-08-27
關鍵字
Keywords
等徑轉角擠型、再結晶、銅
copper, ECAE, recrystallization
統計
Statistics
本論文已被瀏覽 5675 次,被下載 2810
The thesis/dissertation has been browsed 5675 times, has been downloaded 2810 times.
中文摘要
將純銅利用等徑轉角擠型之方法,在100℃~150℃的溫度範圍進行退火處理。結果會在局部區域,產生大於2μm的再結晶晶粒。除再結晶的區域外,其餘區域仍存在大量的變形組織。因此,實驗結果顯示,我們並無法以低溫退火的方式,使經ECAE加工過的純銅,能藉著回復或再結晶的方式而轉變成較均勻的細晶銅。
另外,選擇9組不同退火條件的試片,作拉伸試驗。從拉伸試驗當中可知道,經等徑轉角擠型之純銅,其降伏強度可高達380.2 MPa,且隨著退火條件的不同,機械性質會有相當的改變。
Abstract
none
目次 Table of Contents
目錄
內容摘要 III
表目錄 IV
圖目錄 V
一 前言 1
二 文獻回顧 2
2.1等徑轉角擠型〈EQUAL CHANNEL ANGULAR EXTRUSION,ECAE〉簡介 2
2.1.1等量應變〈equivalent strain〉和模子的角度效應 2
2.1.2等徑轉角擠型的路徑 4
2.1.3選用材料的差異 4
2.2微結構的演化 7
2.3回復與再結晶 9
2.3.1回復(recovery) 9
2.3.2再結晶〈recrystallization〉 12
2.3.2.1靜態再結晶 12
2.3.2.2動態再結晶〈dynamic recrystallization〉 12
2.4 純銅經不同溫度擠程的研究回顧 17
三 研究目的: 19
四 研究方法 20
4.1 試棒的擠製 20
4.2 等溫退火 21
4.3 微硬度測試 21
4.4 拉伸試驗 22
4.5 微觀組織觀察 22
五 實驗結果與討論 23
5-1 硬度值測定 23
5-2 微結構觀察 28
5-3 機械性質 49
5-3-1應力應變曲線 49
5-3-2 斷裂面的觀察 52
六 討論 64
七 結論 67
八 參考文獻 68
附錄 71

參考文獻 References
1 R. Z. Valiev, E. V. Kozlov, Yu. F. Ivanov, J. Lian, A. A. Nazarov and B. Baudelet, “Deformation Behaviour of Ultra-Fine-Grained Copper”, Acta Metall. Mater., 42 (1994) 1047.
2 R. Z. Valiev, ”Structure and Mechanical Properties of Ultrafine-Grained Metals”, Mater. Sci. Eng., A234-236 (1997) 59.
3 Anthony A. W. Thompson, “Yielding in Nickel As A Function of Grain or Cell Size”, Acta metall.,23(1975)1337.
4 N. Wang, Z. Wang, K. T. Aust and U. Erb, “Effect of Grain Size On Mechanical Properties of Nanocrystalline Materials”, Acta metal. mater.,43(1995)519.
5 孫佩鈴,”純鋁經大量塑性變形生成細晶粒之研究”,中山大學碩士論文 (1999).
6黃文賢, “純銅經等徑轉角擠形加工後微觀組織之演化”, 中山大學博士論文(2000).
7 Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto and T. G. Langdon, “Principle of Equal-Channel Angular Pressing for The Processing of Ultra-Fine Grained Materials”,Scripta Materialia, 35,(1996) 143.
8 V. M. Segal, “Materials Processing by Simple Shear” Materials Science & Engineering A197(1995)157.
9 Y. Iwahashi, Z. Horita, M. Nemoto and T.G. Langdon, “The Process of Grain Refinement in Equal –Channel Angular Pressing”,Acta Mater.,46,(1998) 3317.
10 Y. Iwahashi, Z. Horita, M. Nemoto and T. G. Langdon, "Factors influencing the equilibrium grain size in equal-chnnel angular 20pressing:Role of Mg additions to Aluminum",Metal. Mater. Trans., 29A (1998) 2503.
11 K. Nakashima, Z.Horita, M.Nemoto and T. G. Langdon, ”Influence of Channel Angle on the Development of Ultrafine Grains in Equal-Channel Angular Pressing”,Acta Mater., 46,(1998)1589.
12 D. A. Hughes and N. Hansen, “High Angle Boundaries Formed By Grain Subdivision Mechanisms”, Acta Metall. Mater, 45 (1997) 3871.
13 F. J. Humphreys and M.Hatherly,”Recrystallization and Related Annealing Phenomena”, Pergamon.
14 F.J.HUMPHREYS, “A Unified Theory of Recovery, Recry-stallization and Grain Growth, Based on The Stability and Growth of Cellular Microstructures-I. The Basic Model”, Acta mater., 45(1997)4231.
15 T. Furu, R. Orsund and E. Nes, “Subgrain Growth in Heavily Deformed Aluminium-Experimental Investigation and Modelling Treatment”, Acta Metall. Mater, 43 (1995) 2209.
16 F. J. Humphreys, "Recrystallization and Recovery", in Materials Science and Technology, ed. By R. W. Cahn, P. Haasen and E. J. Kramer, Vol.15(1991), p.371, VCH.
17 N.A.akhmadeev, N.P.Kobelev, R.R.Mulyukov, YA.M.Soifer and R. Z. Valiev, “The Effect of Heat Treatment on The Dissipative Pro perties of Copper With The Submicrocrystalline Structure “, Acta metall. Mater., 41, (1993) 1041.
18 蔡東霖,”利用ECAE及退火處理細化鋁鎂合金晶粒”,中山大學碩士論文 (2001).
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內外都一年後公開 withheld
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus: 已公開 available


紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code