Responsive image
博碩士論文 etd-0901107-164621 詳細資訊
Title page for etd-0901107-164621
論文名稱
Title
陣列光纖雷射銲接與銲後位移補償
Laser Welding and Post-Weld-Shift Compensation for Fiber Array Packaging
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
70
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2007-07-24
繳交日期
Date of Submission
2007-09-01
關鍵字
Keywords
雷射銲接、光纖陣列、銲後位移
post-weld-shift, fiber array, laser hammering
統計
Statistics
本論文已被瀏覽 5620 次,被下載 8
The thesis/dissertation has been browsed 5620 times, has been downloaded 8 times.
中文摘要
雷射銲接技術的構裝過程快速且準確性高,具有自動化發展構裝和增加產品的可靠度等優點,所以目前都是利用雷射銲接技術來進行半導體雷射與光纖的固定結合。但雷射銲接在短時間使材料瞬間熔融冷卻產生了銲後位移,因此導致模組性能不佳,所以在改善方面可經由兩個方式來完成:1.銲接過程中分析並且選用適當的銲接程序來減少銲後位移。2.排定一系列補償的程序,補償產生的銲後位移,來提高模組的構裝性能。因此本研究針對陣列模組發展出一套最佳的構裝程序減少銲後位移。另外在補償上也加入旋轉量來考慮,擬定出一套合理可行的補償策略。
Abstract
none
目次 Table of Contents
謝誌..................................................... I
目錄.....................................................II
中文摘要.................................................IV
第一章 序論...............................................1
1.1 前言.............................................. 1
1.2 陣列模組的構裝.....................................4
1.3光纖陣列的容忍度分析................................7
1.4主動式陣列模組雷射銲接流程..........................9
1.5 研究動機與目的....................................12
第二章 文獻回顧..........................................13
2.1陣列模組構裝分類及補償技術.........................13
2.2雷射銲接流程中的參數討論...........................21
第三章 陣列模組銲接分析..................................30
3.1元件材料與模擬設定.................................20
3.2馬鞍與基板銲接分析與模擬...........................35
3.3載具與馬鞍銲接分析與模擬...........................39
3.4模組銲接結果.......................................43
第四章 補償分析及策略....................................51
4.1補償策略...........................................51
4.2 X、Roll銲後位移補償................................55
4.3 Y銲後位移補償.....................................58
4.4 銲接及補償流程....................................60
第五章 貢獻與未來展望....................................62
參考文獻.................................................63
參考文獻 References
[1] 羅振家, "陣列光纖雷射銲接構裝與銲後位移量測," 國立中山大學機械與機電工程學系碩士論文, 2006.
[2] Y. Lin, W. Liu, and F. G. Shi, "Adhesive joint design for high yield and low cost assembly of fiberoptic devices," Electronic Components and Technology Conference, 2002. Proceedings. 52nd, pp. 28-31, 2002.
[3] Z. Zhang, J. Liu, P. Zhao, G. Z. Xiao, and C. P. Grover, "Active alignment of optical fibers to planar waveguides using a thermal-curing adhesive," Lightwave Technology, vol. 23, 2005.
[4] S.-G. Kang, M.-K. Song, S.-S. Park, S.-H. Lee, N. Hwang, H.-T. Lee, K.-R. Oh, G.-C. Joo, and D. Lee, "Fabrication of semiconductor optical switch module using laser welding technique," Advanced Packaging, IEEE Transactions vol. 23, pp. 672- 680, 2000.
[5] W. Hunziker, W. Vogt, H. Melchior, R. Germann, and C. Harder, "Low cost packaging of semiconductor laser arrays using passive self-aligned flip-chip technique on Si motherboard," Electronic Components and Technology Conference, pp. 46th 28-31, 1996.
[6] M. Itoh, J. Sasaki, A. Uda, I. Yoneda, H. Honmou, and K. Fukushima, "Use of AuSn solder bumps in three-dimensional passive alignedpackaging of LD/PD arrays on Si optical benches," Electronic Components and Technology Conference, 1996. Proceedings., 46th, pp. 1-7, 1996.
[7] Ben Ting and V. P. Manno, "Transient Thermomechanical Simulation of Laser Hammering in Optoelectronic Package Manufacturing," Electronic Packaging vol. 127 pp. 299-305, 2005.
[8] S. G. Kang, M. K. Song, H. T. Lee, N. Hwang, S. S. Park, D. G. Kim, and K. E. Pyun, "Application of laser welding technique for high speed optical transmission device package," Lasers and Electro-Optics Society Annual Meeting, vol. 1, pp. 246-247, 1995.
[9] W.-H. Cheng, W.-H. Wang, and J.-C. Chen, "Defect formation mechanisms in laser welding techniques forsemiconductor laser packaging," Components, Packaging, and Manufacturing Technology, Part B: Advanced Packaging, IEEE Transactions vol. 19, pp. 764-769, 1996.
[10] S. C. Wang, C. Wang, Y. K. Tu, C. J. Hwang, S. Chi, W. H. Wang, and W. H. Cheng, "Effect of Au coating on joint strength in laser welding for Invar-Invar packages," Electronic Components and Technology Conference, pp. 942-945, 1996.
[11] 黃韋凱, "2.5-10Gbs高速蝶式半導體雷射模組銲後位移之研究," 國立中山大學光電工程學系碩士論文, 2003.
[12] W. H. Cheng, W. H. Wang, H. Y. Chen, and H. H. Lin, "Reduction of micromovement in optoelectronic packaging," Lasers and Electro-Optics Society Annual Meeting, vol. 1, pp. 248-249 1995.
[13] P. Mueller and B. Valk, "Automated fiber attachment for 980 nm pump modules," Electronic Components and Technology Conference, pp. 5-9, 2000.
[14] Y. Lin and F. G. Shi, "Weld clip design for minimization of welding-induced-alignment-distortion in butterfly laser module packages," Advanced Packaging Materials: Processes, Properties and Interfaces, pp. 9- 12, 2005.
[15] W. H. Cheng, Y. C. Hsu, W. K. Huang, and M. T. Sheen, "Reduction of fiber alignment shifts in high-speed laser module packaging," Optoelectronics, Proceedings of the Sixth Chinese Symposium, pp. 247- 250, 2003.
[16] Y.-T. Tseng and H.-C. Sung, "A novel inspection of fiber post-weld-shift in butterfly laser module packaging," Advanced Packaging, IEEE Transactions vol. 28, pp. 713- 719, 2005.
[17] 邱顯桓, "蝶式雷射模組銲後位移與能量損失之研究," 國立中山大學機械與機電工程學系碩士論文, 2004.
[18] Y. Lin, W. Liu, and F. G. Shi, "Laser welding induced alignment distortion in butterfly lasermodule packages: effect of welding sequence," Advanced Packaging, IEEE Transactions vol. 25, pp. 73-78, 2002.
[19] Y. Lin, C. Eichele, and F. G. Shi, "Effect of welding sequence on welding-induced-alignment-distortion in packaging of butterfly laser diode modules: Simulation and experiment," Lightwave Technology, vol. 23, pp. 615- 623, 2005.
[20] Y. Lin and F. G. Shi, "Effect of laser welding sequence on WIAD in packaging of dual-in-line laser modules," Advanced Packaging Materials: Processes, Properties and Interfaces, pp. 169- 172, 2005.
[21] 蔡錦溢, 邱顯森, and 曾文鵬, "雷射銲接與錫銲技術在光通訊元件構裝固著應用," 機械工業雜誌246期, pp. 233-238, 2003.
[22] J.-H. Kuang, M.-T. Sheen, S.-C. Wang, G.-L. Wang, and W.-H. Cheng, "Post-Weld-Shift in Dual-in-Line Laser Package," Advanced Packaging, IEEE Transactions, vol. 24, pp. 81-85, 2001.
[23] M. Labudovic and M. Burka, "Finite element analysis of post-weld shift during fiber pigtail of 980 nm pump lasers," Advanced Packaging, IEEE Transactions vol. 26, pp. 41- 46, 2003.
[24] J. H. C. van Zantvoort, S. G. L. Plukker, E. C. A. Dekkers, G. D. Khoe, A. M. J. Koonen, and H. de Waardt, "Laser supported fibre array alignment with individual fibre fine positioning," Electronic Components and Technology Conference, vol. 1, pp. 266- 271, 2005.
[25] S. C. Wang, H. L. Chan, C. Wang, C. M. Wang, J. W. Liaw, M. T. Sheen, J. H. Kuang, C. P. Chien, G. L. Wang, and W. H. Cheng, "Post-weld-shift in semiconductor laser packaging," Electronic Components and Technology Conference, pp. 1159-1163, 1999.
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:校內一年後公開,校外永不公開 campus withheld
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus:永不公開 not available

您的 IP(校外) 位址是 35.168.113.248
論文開放下載的時間是 校外不公開

Your IP address is 35.168.113.248
This thesis will be available to you on Indicate off-campus access is not available.

紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code