論文使用權限 Thesis access permission：校內外都一年後公開 withheld
開放時間 Available：
校內 Campus： 已公開 available
校外 Off-campus： 已公開 available
博碩士論文 etd-0906105-141430 詳細資訊
Title page for etd-0906105-141430
論文名稱 Title |
摩擦攪拌銲接試片與機台所受應力分析 Stress Analysis of Specimen and Machine of Friction Stir Welding |
||
系所名稱 Department |
|||
畢業學年期 Year, semester |
語文別 Language |
||
學位類別 Degree |
頁數 Number of pages |
66 |
|
研究生 Author |
|||
指導教授 Advisor |
|||
召集委員 Convenor |
|||
口試委員 Advisory Committee |
|||
口試日期 Date of Exam |
2005-07-23 |
繳交日期 Date of Submission |
2005-09-06 |
關鍵字 Keywords |
摩擦攪拌銲接、應力 FSW, stress |
||
統計 Statistics |
本論文已被瀏覽 5620 次，被下載 2227 次 The thesis/dissertation has been browsed 5620 times, has been downloaded 2227 times. |
中文摘要 |
FSW是在1991年所研發出的銲接技術，然而到目前為止，對FSW的研究均著重在試片的微結構、熱影響和殘留應力等方面。但是，對於機台的應力，則未有探討。所以本論文著重在分析機台之應力，其結果可以做為未來FSW用於微小試片時機台設計的依據。 首先，建立機台在受力狀態下的統制平衡方程式。然後，使用MATLAB軟體來計算和分析。且從中得到試片的撓度和機台 應力的主要影響範圍，並加以討論及分析。 |
Abstract |
FSW is a new welding technology developed in 1991, but up till now, the study on FSW is mainly focus on the residual stress, micro-structure and thermal effect of specimen etc. However, the stresses of the machine platform have not discussed yet. This research of the stresses of the machine, and the results can be used to design the machine platform of the FSW for micro specimen in the future. The governing equilibrium equation of machine platform under the load was set up in the beginning. Then the equation was solved by using the MATLAB software. The main influence ranges of deflections of the specimen and of the machine platform was obtained and discussed. |
目次 Table of Contents |
第一章 |
參考文獻 References |
1. Thomas W. M., Nicholas E. D.,Needham J. C.,Murch M. C.,Temple-Smith P. and Dawes C. J.(TWI)”Improvements Relating to Friction Welding”, European Patent Specification 0 615 480 B1. 2. Midling O. T.,Morley E. J., Sandvik A.,”Friction Stir Welding”, European Patent Application 0 752 926 B1. 3. 英國銲接研究所(TWI)： www.twi.co.uk 4. W. M. Thomas and E. D. Nlcholas, “Friction Stir Welding for The Transportation Industries” Materials & Design, Vol.18, pp.269-273, 1997. 5. Threadgill P. L., ”Friction Stir Welds in Aluminium Alloy-preliminary Microstructural Assessment,” TWI Bulletin, March/April 1997. 6. Benson P. G., Backlund J, ”Possibilities with Aluminium Extrusions Joined by Friction Stir Welding”, 4th Int Forum on Aluminium Ships, New Orleans, pp.10-11, May 2000. 7. Midling O. T., Oosterkamp L. D., Beraas J, ”Friction Stir Welding Alminium-process and Application”, 7th Inalco Conf, Cambridge, pp.15-17, Apr 1998. 8. M. A. Sutton, B. Yang, A. P. Reynolds and R. Taylor, “Microstructural Studies of Friction Stir Welds in 2024-T3 Aluminum”, Materials Science and Engineering, Vol.323, pp.160-166, 2002. 9. C. G. Rhodes, M. W. Mahoney, W. H. Bingel, R. A. Spurling and C. C. Bampton, “Efficts of Friction Stir Welding on Microstructure of 7075 Aluminum”, Scripta Materialia, Vol.36, pp.69-75, 1997. 10. Datong Zhang, Mayumi Suzuki and Kouichi Maruyama, “Microstructural Evolution of A Heat-resistant Magnesium Alloy Due to Friction Stir Welding”, Scripta Materialia, Vol.52, pp.899-903, 2005. 11. Bangcheng yang, junhui Yan, Michael A. Sutton and Anthony P. Reynolds, “Banded Microstructure in AA2024-T351 and AA2524-T351 Aluminum Friction Stir Welds Part I.: Metallurgical Studies”, Material Science and Engineering, Vol.364, PP.55-65, 2004. 12. Michael A. Sutton, Bangcheng yang, Anthony P. Reynolds and junhui Yan, “Banded Microstructure in AA2024-T351 and AA2524-T351 Aluminum Friction Stir Welds Part II.: Mechanical Characterization”, Material Science and Engineering, Vol.364, PP.66-74, 2004. 13. M. Peel, A. Steuwer, M. Preuss and P. J. Withers, “Microstructure, Mechanical Properties and Residual Stresses as A Function of Welding Speed in Aluminium AA5083 Friction Stir Welds”, Acta Materialia, Vol.51, pp.4791-4801, 2003. 14. John A. Wert, “Microstructures of Friction Stir Weld Joints Between An Aluminium-base Metal Matrix Composite and A Monolithic Aluminium Alloy”, Scripta Materialia, Vol.49, pp.607-612, 2003. 15. M. J. Jones, P. Heurtier, C. Desrayaud, F. Montheillet, D. Allehaux and J. H. Driver, “Correlation Between Microstructure and Microhardness in A Friction Stir Welded 2024 Aluminium Alloy”, Scripta Materialia, Vol.52, pp.693-697, 2005. 16. M. Song and R. Kovacevic, “Thermal Modeling of Friction Stir Welding in A Moving Coordinate System and Its Validation”, International Journal of Machine Tools & Manufacture, Vol.43, pp.665-615, 2003. 17. A. P. Reynolds, “Processing –property Correlation in Friction Stir Welds”, Materials Science Forum, pp.1719-1724, 2000. 18.Y. sato, H. Kokawa, M. Enomoto and S. Jogan, “Microstructure Evaluation of 6063 Aluminum During Friction Stir Welding”, Metallurgical and Materials Transaction, Vol.30, pp.2429-2437,1999. 19. Moataz M. Attallaha and Hanadi G. Salem, “Friction Stir Welding Parameters: A Tool for Controlling Abnormal Grain Growth During Subsequent Heat Treatment”, Material Science and Engineering, Vol.391, pp.51-59, 2005. 20. G. Bussu and P. E. Irving, “The Role of Residual Stress and Heat Affected Zone Properties on Fatigue Crack Propagation in Friction Stir Welded 2024-T351 Aluminium Joints”, International Journal of Fatigue, Vol.25, pp.77-88, 2003. 21. Dawes C. J., Thomas W. M. “Friction Stir Process Welds Aluminium Alloys”, The Welding Journal, Vol.75, pp.41-46, 1996. 22. R. John, K.V. Jata and K. Sadananda, “Residual Stress Effects on Near-threshold Fatigue Crack Growth in Friction Stir Welds in Aerospace Alloys”, International Journal of Fatigue, Vol.25, pp.939-948, 2003. 23. G. Bussu and P. E. Irving, “The Role of Residual Stress and Heat Affected Zone Properties on Fatigue Crack Propagation in Friction Stir Welded 2024-T351 Aluminium Joints”, International Journal of Fatigue, Vol.77-88, 2003. 24. X. K. Zhu and Y. J. Chao, “Numerical Simulation of Transient Temperature and Residual Stresses in Friction Stir Welding of 304L Stainless Steel”, Journal of Materials Processing Technology, Vol.146, pp.263-272, 2004. 25. A. P. Reynolds, Wei Tang, T. Gnaupel-Herold and H. Prask, “Structure, Prorerties, and Residual Stress of 304L Stainless Steel Friction Stir Welds”, Scripta Materialia, Vol.48, pp.1289-1294, 2003. 26. Adel S. Saada., “Theory and Applications”, pp.520-562 ,1974 27. Macaulay W. H., “A Note on The Deflection of Beams” Messenger Mathematics, Vol.48, pp.129-135, 1919. 28. Mashing J., “Discontinuity Solutions to Plate and Beam Problems”, International Journal of Mechanical Sciences, Vol.6, pp.455-462, 1964. 29. Wittrik W. H., “A Generation of Macaulay’s Method with Applications in Structural”, Mechanics, Vol.3, pp.326-340, 1965. 30. A. O. Adewale, “Application of The Singularity Function Method to Semi-infinite Orthotropic Rectangular Plates on An Elastic Foundation”, Mechanical Sciences, Vol43, pp.2261-2279, 2001. 31. M. H. Huang and D. P. Thambiratnam, “Analysis of Plate Resting on Elastic Supports and Elastic Foundation by Finite Strip Method”, Vol79,pp.2547-2557,2001. 32. Seong Min Kim and B. Frank McCullough, “Dynamic Response of Plate on Viscous Winkler Foundation to Moving Loads of Varying Amplitude”, Vol25, pp.1179-1188, 2003. 33. Seong-Min Kim, “Influence of Horizontal Resistance at Plate Bottom on Vibration of Plates on Elastic Foundation under Moving Loads”, Engineering Structures, Vol.26, pp.519-529, 2004. 34. 錢偉長，彈性力學，第253-329頁，亞東書局，台北，1989 |
電子全文 Fulltext |
本電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。 |
紙本論文 Printed copies |
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊，請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。 開放時間 available 已公開 available |
QR Code |
國立中山大學 圖書與資訊處 │ 諮詢服務：2452 論文審查小組 │ 服務信箱 │ 系統開發維運：圖資處知識創新組
Office of Library and Information Services, National Sun Yat-sen University │ Contact Us : 2452 Thesis Format Review Team , Mail │ Development and operations : Knowledge Innovation Division, LIS