Responsive image
博碩士論文 etd-0913112-123849 詳細資訊
Title page for etd-0913112-123849
論文名稱
Title
用於家庭區域電網之主動雙橋式隔離型雙向直流轉換器的實現
Implementation of a Dual-Active-Bridge Bidirectional Isolated DC to DC Converter in Home Area Network
系所名稱
Department
畢業學年期
Year, semester
語文別
Language
學位類別
Degree
頁數
Number of pages
103
研究生
Author
指導教授
Advisor
召集委員
Convenor
口試委員
Advisory Committee
口試日期
Date of Exam
2012-07-25
繳交日期
Date of Submission
2012-09-13
關鍵字
Keywords
庭區域電網、雙向隔離型直流對直流轉換器、磷酸鋰鐵電、CAN-bus、Laboratory Virtual Instrumentation Engineering Workbench (LabVIEW)、定電流與定電壓充電。
CAN-bus, bidirectional isolated DC-DC converter, Li+Fe battery, Laboratory Virtual Instrumentation Engineering Workbench (LabVIEW), constant current and constant voltage method., home area network
統計
Statistics
本論文已被瀏覽 5686 次,被下載 1506
The thesis/dissertation has been browsed 5686 times, has been downloaded 1506 times.
中文摘要
近年來智慧型電網的發展備受重視,已有諸多學者為了使電網運作的更有效率紛紛致力於家庭區域電網的研究。本文採用相移式的雙向隔離型直流電壓源對直流電壓源轉換器與磷酸鋰鐵電池來實現家庭區域電網的概念,並利用CAN-bus通訊介面來達成Laboratory Virtual Instrumentation Engineering Workbench (LabVIEW) 圖控軟體與數位訊號處理器之間的溝通,藉由LabVIEW圖控軟體下達電流命令給數位訊號處理器來控制轉換器的運作,以完成對磷酸鋰鐵電池做定電流與定電壓充電以及定電流放電,並針對五種不同的緩衝電容做效率與損失的分析。
Abstract
In recent years, smart gird has received much attention, and many researchers have devoted to home area network (HAN) to improve the efficiency of grid. This thesis proposes a bidirectional isolated DC-DC converter (Dual Active Bridge, DAB) with phase shift control to implement the concept of HAN. Li+Fe battery is used as storage device of the converter, and a bidirectional communication between Laboratory Virtual Instrumentation Engineering Workbench (LabVIEW) and Digital Signal Processor (DSP) is realized by CAN-bus. By setting the current command given by LabVIEW system, the converter is able to charge the Li+Fe battery with constant current and constant voltage method as well as discharge the Li+Fe battery with constant current. Operation principle of the converter and the associated loss are presented.
目次 Table of Contents
目錄
論文審定書……………………………………………………...............i
致謝……………………………………………….…...……..ii
摘要…………………………………...........................……..iii
Abstract……………………………..................……………iv
目錄……………………………………............................…..v
圖目錄……………………………...............................…….vii
表目錄……………………………………….........................xi
第一章 緒論…………………………………...................….1
1.1 研究背景………………...................................................1
1.2 研究動機…………………...............................................5
1.3 論文大綱…………….................................................…..6
第二章 文獻回顧……………….......................…………….7
2.1 簡介………….........................................………………..7
2.2 雙向直流對直流轉換器…….................................……..7
2.3 雙向非隔離型直流對直流轉換器…….............………..8
2.4 雙向隔離型直流對直流轉換器……..….........................9
2.4.1 全橋-電壓源/全橋-電流源….......................……..10
2.4.2 全橋-電壓源/全橋-電壓源………...................…..15
2.5 能量儲存裝置…………………................................…16
2.6 充電策略……………........................................………20
2.7 總結…………………...............................................….23
第三章 電路架構………...............................…………...…24
3.1 簡介…………….............................…………...….24
3.2 動作原理………………….........................………24
3.3 電路分析………….........................................……25
3.4 公式推導………….........................................……37
3.5 ZVS的分析…..…...........................................................42
3.6 高頻變壓器的設計……........................………………47
3.7 總結………………....................................................…53
第四章 實驗結果與分析…………………...................…...54
4.1 簡介…………….............................................……54
4.2 控制方法………………….....................................56
4.3 實驗波形 – 充電模式……….....……............……58
4.4 實驗波形 – 放電模式……………….............……68
4.5 效率與損失……….........................................……70
4.6 效率與損失的比較………………........................……74
4.7 最佳效率的情形下對電池做充電……………………80
4.8 總結……………………………........................………82
第五章 結論與未來研究方向………………….......……...83
5.1 結論………………………………........................……83
5.2 未來研究方向……………………........................……83
參考文獻…………………………………..............……….84
附錄A:設備型號……………………….……...........…….88
附錄B:實驗機台……………………………...............….89
附錄C:實驗硬體所用變壓器的詳細資料…..…..............91
參考文獻 References
[1] I. El-Samahy and E. El-Saadany, “Effect of DG on Power Quality in a Deregulated Environment,” IEEE Power Engineering Society General Meeting, vol. 3, pp. 2969 –2976, 12-16 June 2005.
[2] P. Barker and R. W. de Mello, “Determining the Impact of Distributed Generation on Power Systems: Part 1—Radial power systems,” in Proc. IEEE Power Eng. Soc. Summer Power Meeting, pp. 1645–1658, 2000.
[3] A. Saidian, D. Mirabbasi and M. Heidari, “The Effect of Size of DG on Voltage Flicker and Voltage Sag in Closed-Loop Distribution System,” Industrial Elec-tronics and Applications (ICIEA), 2010 the 5th IEEE Conference on, pp. 68–72, 15-17 June 2010.
[4] T. E. McDermott and R. C. Dugan, “Distributed generation impact on reliability and power quality indices,” Rural Electric Power Conference, 2002. IEEE, pp. D3–D3_7, 2002.
[5] A.Girgis and S. Brahma, “Effect of Distributed Generation on Protective Device Coordination in Distribution System,” Power Engineering, 2001. LESCOPE '01. 2001 Large Engineering Systems Conference on, PP. 115–119, 2001.
[6] S. Chaitusaney and A. Yokoyama, “Impact of Protection Coordination on Sizes of Several Distributed Generation Sources,” Power Engineering Conference, 2005. IPEC 2005. The 7th International, vol. 2, pp. 669–674, Nov. 29 2005-Dec. 2 2005.
[7] C. Cecati, G. Mokryani, A. Piccolo and P. Siano, “An Overview on the Smart Grid Concept,” IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, pp. 3322–3327, 7-10 Nov. 2010.
[8] H. Akagi, “Active Harmonic Filters,” Proceedings of the IEEE, vol. 93, issue 12, pp. 2128–2141, Dec. 2005.

[9] L. Gyugyi, “Power Electronics in Electric Utilities – Static Var Compensators.” Proceedings of the IEEE, vol. 76, issue 4, pp. 483–494, Apr 1988.
[10] S. Shao, T. Zhang, M. Pipattanasomporn, and S. Rahman, “Impact of TOU Rates on Distribution Load Shapes in a Smart Grid with PHEV Penetration,” Transmis-sion and Distribution Conference and Exposition, 2010 IEEE PES, pp. 1–6, 19-22 Apr. 2010.
[11] R. E. Brown, “Impact of Smart Grid on Distribution System Design,” Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, 2008 IEEE, pp. 1–4, 20-24 July 2008.
[12] M. Z. Huq and S. Islam, “Home Area Network Technology Assessment for De-mand Response in Smart Grid Environment,” Universities Power Engineering Conference (AUPEC), 2010 20th Australasian, pp. 1–6, 5-8 Dec. 2010.
[13] Y. Miura, M. Kaga, Y. Horita and T. Ise, “Bidirectional Isolated Dual Full-bridge DC-DC Converter with Active Clamp for EDLC,” Energy Conversion Congress and Exposition (ECCE), 2010 IEEE, pp. 1136–1143, 12-16 Sept. 2010.
[14] Y. Du, S. Lukic, B. Jacobson and A. Huang, “Review of High Power Isolated Bi-directional DC-DC Converters for PHEV/EV DC Charging Infrastructure,” En-ergy Conversion Congress and Exposition (ECCE), 2011 IEEE, pp. 553–560, 17-22 Sept. 2011.
[15] N. Mohan, T. M. Undeland and W. P. Robbins, Power Electronics, Hoboken, New Jersey: John Wiley & Sons, 2003.
[16] B. Ray, “Bidirectional DC-DC Power Conversion using Quasi-resonant Topology,” Power Electronics Specialists Conference, 1992. PESC '92 Record., 23rd Annual IEEE, vol. 1, pp. 617–624, 29 Jun-3 Jul 1992.


[17] L. Zhu, “A Novel Soft-Commutating Isolated Boost Full-bridge ZVS-PWM DC-DC Converter for Bi-directional High Power Applications,” Power Electronics Specialists Conference, 2004. PESC 04. 2004 IEEE 35th Annual, vol. 3, pp. 2141–2146, 20-25 June 2004.
[18] E. S. Kim, K. Y. Joe, H. Y. Choi, Y. H. Kim and Y. H. Cho, “An Improved Soft Switching Bi-directional PSPWM FB DC-DC Converter,” Industrial Electronics Society, 1998. IECON '98. Proceedings of the 24th Annual Conference of the IEEE, vol. 2, pp. 740–743, 31 Aug-4 Sep 1998.
[19] K. Wang, C. Y. Lin, L. Zhu, D. Qu, F. C. Lee and J. S. Lai, “Bi-directional DC to DC Converters for Fuel Cell Systems,” Power Electronics in Transportation, 1998, pp. 47–51, 22-23 Oct 1998.
[20] E. S. Park, S. J. Choi, J. M. Lee and B. H. Cho, “A Soft-switching Active-clamp Scheme for Isolated Full-bridge Boost Converter,” Applied Power Electronics Conference and Exposition, 2004. APEC '04. Nineteenth Annual IEEE, vol. 2, pp. 1067–1070, 2004.
[21] J. G. Cho, G. H. Rim, F. C. Lee, “Zero Voltage and Zero Current Switching Full Bridge PWM Converter using Secondary Active Clamp,” Power Electronics Spe-cialists Conference, 1996. PESC '96 Record., 27th Annual IEEE, vol. 1, pp. 657–663, 23-27 Jun 1996.
[22] S. Inoue and H. Akagi, “A Bidirectional DC-DC Converter for An Energy Storage System with Galvanic Isolation,” Power Electronics, IEEE Transactions on, vol. 6, issue 6, pp. 2299–2306, Nov. 2007.
[23] R. W. De Doncker, D. M. Divan and M.H. Kheraluwala, “A Three-phase Soft-switched High Power Density DC-DC Converter for High Power Applica-tions,” Industry Applications, IEEE Transactions on, vol. 27, issue 1, pp. 63–73, Jan/Feb 1991.
[24] S. Vazquez, S. M. Lukic, E. Galvan, L. G. Franquelo and J. M. Carrasco, “Energy Storage Systems for Transport and Grid Applications,” Industrial Electronics, IEEE Transactions on, vol. 57, issue 12, pp. 3881–3895, Dec. 2010.
[25] C. C. Hua and Z. W. Syue, “Charge and Discharge Characteristics of Lead-Acid Battery and LiFePo4 Battery,” Power Electronics Conference (IPEC), 2010 Inter-national, pp. 1478–1483, 21-24 June 2010.
[26] P. H. Cheng and C. L. Chen, “High Efficiency and Nondissipative Fast Charging Strategy,” Electric Power Applications, IEE Proceedings, vol. 150, issue 5, pp. 539–545, 9 Sept. 2003.
[27] 陳仁傑,“鋰離子電池管理系統研製”,國立中正大學,碩士論文,中華民國98年。
[28] R. T. Naayagi and A. J. Forsyth, “Bidirectional DC-DC Converter for Aircraft Electric Energy Storage Systems,” Power Electronics, Machines and Drives (PEMD 2010), 5th IET International Conference on, pp. 1–6, 19-21 April 2010.
[29] M. N. Kheraluwala, R. W. Gascoigne, D. M. Divan and E. D. Baumann, “Perfor-mance Characterization of A High-power Dual Active Bridge DC-to-DC Convert-er,” Industry Applications, IEEE Transactions on, vol. 28, issue 6, pp. 1294–1301, Nov/Dec 1992.
[30] R. T. Naayagi, A. J. Forsyth and R. Shuttleworth, “High-Power Bidirectional DC-DC Converter for Aerospace Applications,” Power Electronics, IEEE Transac-tions on, vol. 27, issue 11, pp. 4366–4379, Nov. 2012.
[31] 王信雄,“訓練課程-切換式電源的磁性元件:原理、設計與應用”,國立清華大學電機系先進電源科技中心,12/6-12/7 2004。
電子全文 Fulltext
本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
論文使用權限 Thesis access permission:自定論文開放時間 user define
開放時間 Available:
校內 Campus: 已公開 available
校外 Off-campus: 已公開 available


紙本論文 Printed copies
紙本論文的公開資訊在102學年度以後相對較為完整。如果需要查詢101學年度以前的紙本論文公開資訊,請聯繫圖資處紙本論文服務櫃台。如有不便之處敬請見諒。
開放時間 available 已公開 available

QR Code